Bull Escala BL460, Руководство по диагностике и обслуживанию, Страница: 246 / 266

226
Escala BL460 - Problem Determination and Service Guide
•
To avoid possible danger, read and follow the following safety statement.
Statement 2:
CAUTION:
When replacing the lithium battery, use only a battery recommended by the
manufacturer. If your system has a module containing a lithium battery, replace it only
with the same module type made by the same manufacturer. The battery contains
lithium and can explode if not properly used, handled, or disposed of.
Do not:
• Throw or immerse into water
•
Heat to more than 100°C (212°F)
• Repair or disassemble
Dispose of the battery as required by local ordinances or regulations.
Perform the following procedure to install the battery.
1. Follow any special handling and installation instructions that come with the battery.
2. Tilt the battery so that you can insert it into the socket, under the battery clip.
Make sure that the side with the positive (+) symbol is facing up.
3. As you slide it under the battery clip, press the battery down into the socket.
4. Install and close the blade server cover. See “ Installing and closing the blade server
cover ” on page 208 .
Statement 21
CAUTION:
Hazardous energy is present when the blade server is connected to the power source.
Always replace the blade server cover before installing the blade server.
5. Install the blade server into the Bull Blade Chassis - Enterprise. See “ Installing the blade
server in a Bull Blade Chassis - Enterprise ” on page 204 .
6. Turn on the blade server and reset the system date and time through the operating
system that you installed. For additional information, see your operating-system
documentation.