Bull Escala BL460, Руководство по диагностике и обслуживанию, Страница: 120 / 266

100
Escala BL460 - Problem Determination and Service Guide
• If the system hangs on a progress code, follow the suggested actions in the order in which they are listed
in the Action column until the problem is solved. If an action solves the problem, you can stop performing
theremaining actions.
•
See Chapter 3 , “ Parts listing ,” on page 197 to determine which components are CRUs and which
components are FRUs.
Progress code Description Action
CA2799FD
A firmware update module is being
read.
This checkpoint alternates in the control panel with
CA2799FF.
This pair of checkpoints might stay in the display
for up to 30 minutes with no indication of activity
other than the alternating codes. Do not assume
that the system is hung until the alternation stops
and only one of the checkpoints remains in the
control panel for at least 30 minutes, with no other
indication of activity.
If the system is hung on this checkpoint, then
CA2799FD and CA2799FF are not alternating
and you must perform the following
procedure:
1. Shut down the blade server.
2. Restart it using the permanent boot image.
3. Reject the temporary image.
CA2799FF
A firmware update module is being
written.
This checkpoint alternates in the control panel with
CA2799FD.
This pair of checkpoints might stay in the display
for up to 30 minutes with no indication of activity
other than the alternating codes. Do not assume
that the system is hung until the alternation stops
and only one of the checkpoints remains in the
control panel for at least 30 minutes, with no other
indication of activity.
If the system is hung on this checkpoint, then
CA2799FD and CA2799FF are not alternating
and you must perform the following procedure:
1. Shut down the blade server.
2. Restart it using the permanent boot image.
3. Reject the temporary image.