Bull Escala BL460, Руководство по диагностике и обслуживанию, Страница: 121 / 266

Chapter 2. Diagnostics
101
2.4.2.6 D1001xxx to D1xx3FFF Service processor dump codes
D1xx service processor dump status codes indicate the cage or node ID that the dump
component is processing, the node from which the hardware data is collected, and a
counter that increments each time that the dump processor stores 4K of dump data.
Service processor dump status codes use the format, D1 yy 1 xxx , where yy and xxx can be
any number or letter.
The yy part of the code indicates the cage or node ID that the dump component is
processing. The node varies depending on the node from which the hardware data is
collected. The node is 0xFF when collecting the mainstore memory data.
The xxx part of the code is a counter that increments each time that the dump processor
stores 4K of dump data.
Table 2-19 on page 101 lists the progress codes that might be displayed during the power-
on self-test (POST), along with suggested actions to take if the system hangs on the progress
code. Only when you experience a hang condition should you take any of the actions
described for a progress code.
Table 2-19.
D1001xxx to D1xx3FFF dump codes
• If the system hangs on a progress code, follow the suggested actions in the order in which they are listed
in the Action column until the problem is solved. If an action solves the problem, you can stop performing
theremaining actions.
• See Chapter 3 , “ Parts listing ,” on page 197 to determine which components are CRUs and which
components are FRUs.
Progress code Description Action
D1001xxx Dump error data
1. Go to “
Checkout procedure
” on page 148 .
2. Replace the system-board and chassis assembly,
as described in “
Replacing the Tier 2 system-
board and chassis assembly
” on page 229 .
D1011xxx Dump sai_header
1. Go to “
Checkout procedure
” on page 148 .
2. Replace the system-board and chassis assembly,
as described in “
Replacing the Tier 2 system-
board and chassis assembly
” on page 229 .
D101C00F No power off to allow debugging for
CPU controls
1. Go to “
Checkout procedure
” on page 148 .
2. Replace the system-board and chassis assembly,
as described in “
Replacing the Tier 2 system-
board and chassis assembly
” on page 229 .
D1021xxx Dump dump header directory
1. Go to “
Checkout procedure
” on page 148 .
2. Replace the system-board and chassis assembly,
as described in “
Replacing the Tier 2 system-
board and chassis assembly
” on page 229 .
D1031xxx Dump dump header fips header
1. Go to “
Checkout procedure
” on page 148 .
2. Replace the system-board and chassis assembly,
as described in “
Replacing the Tier 2 system-
board and chassis assembly
” on page 229 .
D1041xxx Dump dump header entry header
1. Go to “
Checkout procedure
” on page 148 .
2. Replace the system-board and chassis assembly,
as described in “
Replacing the Tier 2 system-
board and chassis assembly
” on page 229 .