Bull Escala BL460, Руководство по диагностике и обслуживанию, Страница: 150 / 266

130
Escala BL460 - Problem Determination and Service Guide
SRN Description FRU/action
A05-00x
Error log analysis indicates an environmental
and power warning, but the failure could not
be isolated.
1. Check the management-module event log; if an error
was recorded by the system, see “ POST progress
codes (checkpoints) ” on page 71 .
2. If no entry is found, replace the system-board and
chassis assembly.
A05-01x Sensor indicates a fan has failed.
1. Check the management-module event log; if an error
was recorded by the system, see “ POST progress
codes (checkpoints) ” on page 71 .
2. If no entry is found, replace the system-board and
chassis assembly.
A05-02x System shutdown due to a fan failure.
1. Check the management-module event log; if an error
was recorded by the system, see “ POST progress
codes (checkpoints) ” on page 71 .
2. If no entry is found, replace the system-board and
chassis assembly.
A05-03x
Sensor indicates a voltage outside normal
range.
1. Check the management-module event log; if an error
was recorded by the system, see “ POST progress
codes (checkpoints) ” on page 71 .
2. If no entry is found, replace the system-board and
chassis assembly.
A05-04x
System shutdown due to voltage outside
normal range.
1. Check the management-module event log; if an error
was recorded by the system, see “ POST progress
codes (checkpoints) ” on page 71 .
2. If no entry is found, replace the system-board and
chassis assembly.
A05-05x
Sensor indicates an abnormally high internal
temperature.
1. Make sure that:
a. The room ambient temperature is within the
system operating environment.
b. There is unrestricted air flow around the system.
c. All system covers are closed.
d. There are no fan failures
2. Check the management-module event log; if an error
was recorded by the system, see “ POST progress
codes (checkpoints) ” on page 71 .
3. If no entry is found, replace the system-board and
chassis assembly.
A05-06x
System shutdown due to abnormally high
internal temperature.
1. Make sure that:
a. The room ambient temperature is within the
system operating environment.
b. There is unrestricted air flow around the system.
c. All system covers are closed.
d. There are no fan failures
2. Check the management-module event log; if an error
was recorded by the system, see “ POST progress
codes (checkpoints) ” on page 71 .
3. If no entry is found, replace the system-board and
chassis assembly.
A05-07x Sensor indicates a power supply has failed.
1. Check the management-module event log; if an error
was recorded by the system, see “ POST progress
codes (checkpoints) ” on page 71 .
2. If no entry is found, replace the system-board and
chassis assembly.
A05-08x
System shutdown due to power supply
failure.
1. Check the management-module event log; if an error
was recorded by the system, see “ POST progress
codes (checkpoints) ” on page 71 .
2. If no entry is found, replace the system-board and
chassis assembly.
A05-10x System shutdown due to FRU that has failed.
1. Check the management-module event log; if an error
was recorded by the system, see “ POST progress
codes (checkpoints) ” on page 71 .
2. If no entry is found, replace the system-board and
chassis assembly.