Bull Escala BL460, Руководство по диагностике и обслуживанию, Страница: 44 / 266

24
Escala BL460 - Problem Determination and Service Guide
• Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved. If an action solves the problem, then you can stop performing the remaining actions.
• See Chapter 3 , “ Parts listing ,” on page 197 to determine which components are CRUs and which
components are FRUs.
1xxxyyyy
Error Codes
Description Action
2640 VRM CP1 core pGood fault
1. Go to “
Checkout procedure
” on page 148 .
2. Replace the system-board and chassis assembly, as described in
“
Replacing the Tier 2 system-board and chassis assembly
” on
page 229 .
2642 VRM CP1 cache pGood fault
1. Go to “
Checkout procedure
” on page 148 .
2. Replace the system-board and chassis assembly, as described in
“
Replacing the Tier 2 system-board and chassis assembly
” on
page 229 .
2647
No 12V dc coming to the
blade server from the Bull
Blade Chassis – Enterprise
midplane
1. Check the management-module event log for errors that indicate a
power problem with the Bull Blade Chassis - Enterprise.
2. Resolve any problems that are found.
3. Reboot the blade server.
4. If the problem is not resolved, replace the system board and chassis
assembly, as described in “
Replacing the Tier 2 system-board and
chassis assembly
” on page 229 .
2648 Blade power latch fault
1. Go to “
Checkout procedure
” on page 148 .
2. Replace the system-board and chassis assembly, as described in
“
Replacing the Tier 2 system-board and chassis assembly
” on
page 229 .
2649 Blade power fault
1. Go to “
Checkout procedure
” on page 148 .
2. Replace the system-board and chassis assembly, as described in
“
Replacing the Tier 2 system-board and chassis assembly
” on
page 229 .
2670
The Bull Blade Chassis -
Enterprise encountered a
problem, and the blade
server was automatically shut
down as a result
1. Check the management-module event log for entries that were made
around the time that the Escala BL460 blade server shut down.
2. Resolve any problems that are found.
3. Reboot the blade server.
4. If the problem is not resolved, replace the system board and chassis
assembly, as described in “
Replacing the Tier 2 system-board and
chassis assembly
” on page 229 .
2671
12V power fault in the blade
server
1. Go to “
Checkout procedure
” on page 148 .
2. Replace the system-board and chassis assembly, as described in
“
Replacing the Tier 2 system-board and chassis assembly
” on
page 229 .
8400 Invalid configuration decode
1. Check for server firmware updates.
2. Apply any available updates.
3. If the problem persists:
a. Go to “
Checkout procedure
” on page 148 .
b. Replace the system-board and chassis assembly, as described in
“
Replacing the Tier 2 system-board and chassis assembly
” on
page 229 .
8402
Unable to get VPD from the
concentrator
1. Go to “
Checkout procedure
” on page 148 .
2. Replace the system-board and chassis assembly, as described in
“
Replacing the Tier 2 system-board and chassis assembly
” on
page 229 .
8413 Invalid processor 1 VPD
1. Go to “
Checkout procedure
” on page 148 .
2. Replace the system-board and chassis assembly, as described in
“
Replacing the Tier 2 system-board and chassis assembly
” on
page 229 .