Bull Escala BL460, Руководство по диагностике и обслуживанию, Страница: 75 / 266

Chapter 2. Diagnostics
55
• Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved. If an action solves the problem, then you can stop performing the remaining actions.
•
See Chapter 3 , “ Parts listing ,” on page 197 to determine which components are CRUs and which
components are FRUs.
Error code Description Action
BA060030
Logical partitioning with shared
processors is enabled and the operating
system does not support it.
1. Install or boot a level of the operating system that
supports shared processors.
2. Disable logical partitioning with shared processors in the
operating system.
3. If the problem remains:
a. Go to “ Checkout procedure ” on page 148 .
b. Replace the system-board and chassis assembly, as
described in “ Replacing the Tier 2 system-board and
chassis assembly ” on page 229 .
BA060060
The operating system expects an IOSP
partition, but it failed to make the
transition to alpha mode.
1. Verify that:
The alpha-mode operating system image is intended for this
partition.
The configuration of the partition supports an alpha-mode
operating system.
2. If the problem remains:
a. Go to “ Checkout procedure ” on page 148 .
b. Replace the system-board and chassis assembly, as
described in “ Replacing the Tier 2 system-board and
chassis assembly ” on page 229 .
BA060061
The operating system expects a non-IOSP
partition, but it failed to make the
transition to MGC mode.
1. Verify that:
The alpha-mode operating system image is intended for this
partition.
The configuration of the partition supports an alpha-mode
operating system.
2. If the problem remains:
a. Go to “ Checkout procedure ” on page 148 .
b. Replace the system-board and chassis assembly, as
described in “ Replacing the Tier 2 system-board and
chassis assembly ” on page 229 .
BA060070
The operating system does not support
this system’s processor(s)
Boot a supported version of the operating system.
BA060071
An invalid number of vectors was
received from the operating system
Boot a supported version of the operating system.
BA060072 Clent-arch-support hcall error
1. Go to “ Checkout procedure ” on page 148 .
2. Replace the system-board and chassis assembly, as
described in “ Replacing the Tier 2 system-board and
chassis assembly ” on page 229 .
BA060075 Clent-arch-support firmware error
1. Go to “ Checkout procedure ” on page 148 .
2. Replace the system-board and chassis assembly, as
described in “ Replacing the Tier 2 system-board and
chassis assembly ” on page 229 .
BA060200
Failed to set the operating system boot list
from the management module boot list
1. Using the SMS menus, set the boot list to the default boot
list.
2. Shut down; then, start up the blade server.
3. Use SMS menus to customize the boot list as required.
4. If the problem persists:
a. Go to “ Checkout procedure ” on page 148 .
b. Replace the system-board and chassis assembly, as
described in “ Replacing the Tier 2 system-board and
chassis assembly ” on page 229 .
BA060201
Failed to read the VPD boot path field
value
1. Go to “ Checkout procedure ” on page 148 .
2. Replace the system-board and chassis assembly, as
described in “ Replacing the Tier 2 system-board and
chassis assembly ” on page 229 .