Bull Escala BL460, Руководство по диагностике и обслуживанию, Страница: 82 / 266

62
Escala BL460 - Problem Determination and Service Guide
• Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved. If an action solves the problem, then you can stop performing the remaining actions.
•
See Chapter 3 , “ Parts listing ,” on page 197 to determine which components are CRUs and which
components are FRUs.
Error code Description Action
BA170201
The firmware was unable to expand
target partition - saving configuration
variable
1. Reboot the blade server.
2. If the problem persists:
a. Go to “ Checkout procedure ” on page 148 .
b. Replace the system-board and chassis assembly, as
described in “ Replacing the Tier 2 system-board and
chassis assembly ” on page 229 .
BA170202
The firmware was unable to expand
target partition - writing event log entry
1. Reboot the blade server.
2. If the problem persists:
a. Go to “ Checkout procedure ” on page 148 .
b. Replace the system-board and chassis assembly, as
described in “ Replacing the Tier 2 system-board and
chassis assembly ” on page 229 .
BA170203
The firmware was unable to expand
target partition - writing VPD data
1. Reboot the blade server.
2. If the problem persists:
a. Go to “ Checkout procedure ” on page 148 .
b. Replace the system-board and chassis assembly, as
described in “ Replacing the Tier 2 system-board and
chassis assembly ” on page 229 .
BA170210
Setenv/$Setenv parameter error - name
contains a null character
1. Go to “ Checkout procedure ” on page 148 .
2. Replace the system-board and chassis assembly, as
described in “ Replacing the Tier 2 system-board and
chassis assembly ” on page 229 .
BA170211
Setenv/$Setenv parameter error - value
contains a null character
1. Go to “ Checkout procedure ” on page 148 .
2. Replace the system-board and chassis assembly, as
described in “ Replacing the Tier 2 system-board and
chassis assembly ” on page 229 .
BA170220
Unable to write a variable value to
NVRAM due to lack of free memory in
NVRAM.
1. Reduce the number of partitions, if ,possible, to add more
NVRAM memory to this partition.
2. If the problem persists:
a. Go to “ Checkout procedure ” on page 148 .
b. Replace the system-board and chassis assembly, as
described in “ Replacing the Tier 2 system-board and
chassis assembly ” on page 229 .
BA170221
Setenv/$setenv had to delete stored
firmware network boot settings to free
memory in NVRAM.
Enter the adapter and network parameters again for the
network boot or network installation.
BA170998
NVRAMRC script evaluation error -
command line execution error.
1. Go to “ Checkout procedure ” on page 148 .
2. Replace the system-board and chassis assembly, as
described in “Replacing the Tier 2 system-board and
chassis assembly” on page 258.
BA180008 PCI device Fcode evaluation error
1. Go to “ Checkout procedure ” on page 148 .
2. Replace the system-board and chassis assembly, as
described in “ Replacing the Tier 2 system-board and
chassis assembly ” on page 229 .