Bull Escala BL460 Скачать руководство пользователя страница 23

Страница: 23 / 266

Chapter 1. Introduction

1.3

Features and specifications

Features and specifications of the Escala BL460 blade server are summarized in this

overview.
The Escala BL460 blade server is used in a Bull Blade Chassis - Enterprise.

Notes

•

Power, cooling, removable-media drives, external ports, and advanced system

management are provided by the Bull Blade Chassis - Enterprise.

•

The operating system in the blade server must provide support for the Universal Serial

Bus (USB), to enable the blade server to recognize and communicate internally with

the removable-media drives and front-panel USB ports

Microprocessor:

•

Dual core, dual socket (4-way) processors @ 4.2 GHz (DCM),

•

64 GB maximum in 8 very low profile (VLP) DIMM slots; supports 2 GB, 4 GB, and 8

GB DDR52 VLP DIMMs,

•

1 internal small-form-factor (SFF) Serial Attached SCSI (SAS) hard drive or Solid State

Drive (SSD).

P5IOC2 I/O hub on-board integrated features:

•

The baseboard management controller (BMC) is a flexible service processor (FSP1)

with Intelligent Platform Management Interface (IPMI), Serial over LAN (SOL), and

Wake on LAN (WOL) firmware support,

•

Two 1 GB Ethernet controllers (HEA) connected to the Bull Blade Chassis - Enterprise

fabric through the 5-port integrated Ethernet switch,

•

SAS RAID 0/1/5 controller,

•

2D ATI Graphics (KVM support),

•

USB 2.0.

Integrated functions:

•

RS-485 interface for communication with the management module,

•

Automatic server restart (ASR),

•

Serial over LAN (SOL) through FSP,

•

Four Universal Serial Bus (USB 2.0) buses on base planar for communication with

keyboard and removable-media drives,

•

Support for USB-attached local keyboard, video, and mouse (KVM),

•

Transferable Anchor function (Renesas Technology HD651330 microcontroller) in the

management card,

•

Optical media available by shared chassis feature.

Daughter card I/O options:

•

1 1Xe expansion card: CFFv, or CIOv,

•

1 PCIe High speed expansion card - CFFh.

Electrical input:

12 V dc

Содержание Escala BL460











































































































































































































































































Результаты поиска

Содержание Escala BL460

Отзывы:

Bull Escala BL460, Руководство по диагностике и обслуживанию, Страница: 23 / 266

Результаты поиска

Содержание Escala BL460

Отзывы: