Bull Escala BL460, Руководство по диагностике и обслуживанию, Страница: 76 / 266

56
Escala BL460 - Problem Determination and Service Guide
• Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved. If an action solves the problem, then you can stop performing the remaining actions.
•
See Chapter 3 , “ Parts listing ,” on page 197 to determine which components are CRUs and which
components are FRUs.
Error code Description Action
BA060202
Failed to update the VPD with the new
boot path field value
1. Go to “ Checkout procedure ” on page 148 .
2. Replace the system-board and chassis assembly, as
described in “ Replacing the Tier 2 system-board and
chassis assembly ” on page 229 .
BA060300
An I/O error on the adapter from which
the boot was attempted prevented the
operating system from being booted.
1. Using the SMS menus, select another adapter from which
to boot the operating system, and reboot the system.
2. Attempt to reboot the system.
3. go to “
Boot problem resolution ” on page 156 .
BA07xxxx
Self configuring SCSI device (SCSD)
controller failure.
1. Go to “ Checkout procedure ” on page 148 .
2. Replace the system-board and chassis assembly, as
described in “ Replacing the Tier 2 system-board and
chassis assembly ” on page 229 .
BA090001
SCSI DASD: test unit ready failed;
hardware error
1. Go to “ Checkout procedure ” on page 148 .
2. Replace the system-board and chassis assembly, as
described in “ Replacing the Tier 2 system-board and
chassis assembly ” on page 229 .
BA090002
SCSI DASD: test unit ready failed; sense
data available
1. Go to “ Checkout procedure ” on page 148 .
2. Replace the system-board and chassis assembly, as
described in “ Replacing the Tier 2 system-board and
chassis assembly ” on page 229 .
BA090003
SCSI DASD: send diagnostic failed;
sense data available
1. Go to “ Checkout procedure ” on page 148 .
2. Replace the system-board and chassis assembly, as
described in “ Replacing the Tier 2 system-board and
chassis assembly ” on page 229 .
BA090004
SCSI DASD: send diagnostic failed:
devofl cmd
1. Go to “ Checkout procedure ” on page 148 .
2. Replace the system-board and chassis assembly, as
described in “ Replacing the Tier 2 system-board and
chassis assembly ” on page 229 .
BA09000A There was a vendor specification error.
1. Check the vendor specification for additional information.
2. If the problem persists:
a. Go to “ Checkout procedure ” on page 148 .
b. Replace the system-board and chassis assembly, as
described in “ Replacing the Tier 2 system-board and
chassis assembly ” on page 229 .
BA09000B Generic SCSD sense error
1. Verify that the SCSD cables and devices are properly
plugged.
2. Correct any problems that are found.
3. If the problem persists:
a. Go to “ Checkout procedure ” on page 148 .
b. Replace the system-board and chassis assembly, as
described in “ Replacing the Tier 2 system-board and
chassis assembly ” on page 229 .
BA09000C The media is write-protected
1. Change the setting of the media to allow writing, then
retry the operation.
2. Insert new media of the correct type.
3. If the problem persists:
a. Go to “ Checkout procedure ” on page 148 .
b. Replace the system-board and chassis assembly, as
described in “ Replacing the Tier 2 system-board and
chassis assembly ” on page 229 .