Bull Escala BL460, Руководство по диагностике и обслуживанию, Страница: 116 / 266

96
Escala BL460 - Problem Determination and Service Guide
• If the system hangs on a progress code, follow the suggested actions in the order in which they are listed
in the Action column until the problem is solved. If an action solves the problem, you can stop performing
theremaining actions.
•
See Chapter 3 , “ Parts listing ,” on page 197 to determine which components are CRUs and which
components are FRUs.
Progress code Description Action
CA00E1F3 Privileged-access password prompt
1. Go to “
Checkout procedure
” on page 148 .
2. Replace the system-board and chassis assembly,
as described in “
Replacing the Tier 2 system-
board and chassis assembly
” on page 229 .
CA00E1F4
End self-test sequence on one or more
boot devices; begin system
management services
1. Go to “
Checkout procedure
” on page 148 .
2. Replace the system-board and chassis assembly,
as described in “
Replacing the Tier 2 system-
board and chassis assembly
” on page 229 .
CA00E1F5 Build boot device list
1. Go to “
Checkout procedure
” on page 148 .
2. Replace the system-board and chassis assembly,
as described in “
Replacing the Tier 2 system-
board and chassis assembly
” on page 229 .
CA00E1F6 Determine boot device sequence
1. Go to “
Checkout procedure
” on page 148 .
2. Replace the system-board and chassis assembly,
as described in “
Replacing the Tier 2 system-
board and chassis assembly
” on page 229 .
CA00E1F7 No boot image located
Go to “ Boot problem resolution ” on page 156 .
CA00E1F8
Build boot device list for SCSD
adapters. (The location code of the
SCSD adapter being scanned is also
displayed.)
1. Go to “
Checkout procedure
” on page 148 .
2. Replace the system-board and chassis assembly,
as described in “
Replacing the Tier 2 system-
board and chassis assembly
” on page 229 .
CA00E1F9
Build boot device list for fibre-channel
adapters. (The location code of the
SAN adapter being scanned is also
displayed.)
1. Go to “
Checkout procedure
” on page 148 .
2. Replace the system-board and chassis assembly,
as described in “
Replacing the Tier 2 system-
board and chassis assembly
” on page 229 .
CA00E1FA
Building device list for SCSD adapters.
(The device ID and device LUN of the
device being scanned is also
displayed.)
1. Go to “
Checkout procedure
” on page 148 .
2. Replace the system-board and chassis assembly,
as described in “
Replacing the Tier 2 system-
board and chassis assembly
” on page 229 .
CA00E1FB Scan SCSD bus for attached devices
1. Go to “
Checkout procedure
” on page 148 .
2. Replace the system-board and chassis assembly,
as described in “
Replacing the Tier 2 system-
board and chassis assembly
” on page 229 .
CA00E1FC
Build boot device list for SSA adapters.
(The location code of the SSA adapter
being scanned is also displayed.)
1. Go to “
Checkout procedure
” on page 148 .
2. Replace the system-board and chassis assembly,
as described in “
Replacing the Tier 2 system-
board and chassis assembly
” on page 229 .
CA00E1FE
Building device list for fibre-channel
(SAN) adapters. (The WWPN of the
SAN adapter being scanned is also
displayed.)
1. Go to “
Checkout procedure
” on page 148 .
2. Replace the system-board and chassis assembly,
as described in “
Replacing the Tier 2 system-
board and chassis assembly
” on page 229 .
CA00E1FF
Build device list for fibre-channel (SAN)
adapters. (The LUN of the SAN adapter
being scanned is also displayed.)
1. Go to “
Checkout procedure
” on page 148 .
2. Replace the system-board and chassis assembly,
as described in “
Replacing the Tier 2 system-
board and chassis assembly
” on page 229 .
CA00E440
Validate NVRAM, initialize partitions as
needed
1. Go to “
Checkout procedure
” on page 148 .
2. Replace the system-board and chassis assembly,
as described in “
Replacing the Tier 2 system-
board and chassis assembly
” on page 229 .