Bull Escala BL460, Руководство по диагностике и обслуживанию, Страница: 201 / 266

Chapter 2. Diagnostics
181
2.10.15 Software problems
Use this information to recognize software problem symptoms and to take
corrective actions.
•
Follow the suggested actions in the order in which they are listed in the Action column until the problem is solved.
•
See Chapter 3 , “ Parts listing ,” on page 197 to determine which components are CRUs and which components are
FRUs.
•
If an action step is preceded by “(Trained service technician only),” that step must be performed only by a trained
service technician.
Symptom Action
You suspect a software problem. 1. To determine whether the problem is caused by the software, make sure that:
−
The server has the minimum memory that is needed to use the
software. For memory requirements, see the information that comes
with the software.
Note: If you have just installed an adapter or memory, the blade server might
have a memory-address conflict.
− The software is designed to operate on the blade server.
− Other software works on the blade server.
−
The software works on another server.
2. If you received any error messages when using the software, see the information
that comes with the software for a description of the messages and suggested solutions
to the problem.
3. Contact your place of purchase of the software.
2.10.16 Universal Serial Bus (USB) port problems
This topic describes USB port problem symptoms and corrective actions.
•
Follow the suggested actions in the order in which they are listed in the Action column until the problem is solved.
•
See Chapter 3 , “ Parts listing ,” on page 197 to determine which components are CRUs and which components are
FRUs.
•
If an action step is preceded by “(Trained service technician only),” that step must be performed only by a trained
service technician.
Symptom Action
A USB device does not work. Make sure that:
− The correct USB device driver is installed.
−
The operating system supports USB devices.