Bull Escala BL460, Руководство по диагностике и обслуживанию, Страница: 102 / 266

82
Escala BL460 - Problem Determination and Service Guide
• If the system hangs on a progress code, follow the suggested actions in the order in which they are listed
in the Action column until the problem is solved. If an action solves the problem, you can stop performing
theremaining actions.
•
See Chapter 3 , “ Parts listing ,” on page 197 to determine which components are CRUs and which
components are FRUs.
Progress code Description Action
C20033FF Finish SoftPOR of a failed ISL slot
1. Go to “ Recovering the system firmware ” on page 186.
2. Replace the system-board and chassis assembly, as
described in “ Replacing the Tier 2 system-board and
chassis assembly ” on page 229 .
C2004100 Waiting for load source device to
enlist
1. Go to “ Recovering the system firmware ” on page 186.
2. Replace the system-board and chassis assembly, as
described in “ Replacing the Tier 2 system-board and
chassis assembly ” on page 229 .
C2004200 Load source device has enlisted
1. Go to “ Recovering the system firmware ” on page 186.
2. Replace the system-board and chassis assembly, as
described in “ Replacing the Tier 2 system-board and
chassis assembly ” on page 229 .
C2004300 Preparing connection to load source
device
1. Go to “ Recovering the system firmware ” on page 186.
2. Replace the system-board and chassis assembly, as
described in “ Replacing the Tier 2 system-board and
chassis assembly ” on page 229 .
C20043FF Load source device is connected
1. Go to “ Recovering the system firmware ” on page 186.
2. Replace the system-board and chassis assembly, as
described in “ Replacing the Tier 2 system-board and
chassis assembly ” on page 229 .
C2006000 Locating first LID information on the
load source
1. Go to “ Recovering the system firmware ” on page 186.
2. Replace the system-board and chassis assembly, as
described in “ Replacing the Tier 2 system-board and
chassis assembly ” on page 229 .
C2006005 Clearing all partition main store
1. Go to “ Recovering the system firmware ” on page 186.
2. Replace the system-board and chassis assembly, as
described in “ Replacing the Tier 2 system-board and
chassis assembly ” on page 229 .
C2006010 Locating next LID information on the
load source
1. Go to “ Recovering the system firmware ” on page 186.
2. Replace the system-board and chassis assembly, as
described in “ Replacing the Tier 2 system-board and
chassis assembly ” on page 229 .
C2006020 Verifying LID information
1. Go to “ Recovering the system firmware ” on page 186.
2. Replace the system-board and chassis assembly, as
described in “ Replacing the Tier 2 system-board and
chassis assembly ” on page 229 .
C2006030 Priming LP configuration LID
1. Go to “ Recovering the system firmware ” on page 186.
2. Replace the system-board and chassis assembly, as
described in “ Replacing the Tier 2 system-board and
chassis assembly ” on page 229 .
C2006040 Preparing to initiate LID load from
load source
1. Go to “ Recovering the system firmware ” on page 186.
2. Replace the system-board and chassis assembly, as
described in “ Replacing the Tier 2 system-board and
chassis assembly ” on page 229 .
C2006050 LP configuration LID primed
successfully
1. Go to “ Recovering the system firmware ” on page 186.
2. Replace the system-board and chassis assembly, as
described in “ Replacing the Tier 2 system-board and
chassis assembly ” on page 229 .
C2006060 Waiting for LID load to complete
1. Go to “ Recovering the system firmware ” on page 186.
2. Replace the system-board and chassis assembly, as
described in “ Replacing the Tier 2 system-board and
chassis assembly ” on page 229 .