Bull Escala BL460, Руководство по диагностике и обслуживанию, Страница: 130 / 266

110
Escala BL460 - Problem Determination and Service Guide
2.4.3.2 101-711 through FFC-725 SRNs
AIX might generate service request numbers (SRNs) from 101-711 to FFC-725.
Replace any parts in the order that the codes are listed in Table 2-22 .
Note An x in the following SRNs represents a digit or character that might have any value.
Table 2-22.
101-711 through FFC-725 SRNs
SRN FFC
Description and Action
101-711 to
101-726
711 to 726
The system hung while trying to configure an unknown resource.
1. Run the stand-alone diagnostics problem determination procedure.
2. If the problem remains, refer to “
Failing function codes 151 through 2D02 ” on page
144 to find the FFC that matches the last three digits of the SRN.
3. Suspect the device adapter or device itself.
101-888 210 227
The system does not IPL. Go to “ Performing the checkout procedure ” on page 149 or
undetermined problem procedure.
101-2020
The system hung while trying to configure the InfiniBand Communication Manager. This
problem may be attributed to software. Report this problem to the AIX Support Center.
101-2021
The system hung while trying to configure the InfiniBand TCP/IP Interface. This problem
may be attributed to software. Report this problem to the AIX Support Center.
101-xxxx xxxx
The system hung while configuring a resource. The last three or four digits after the dash (-)
identify the failing function code for the resource being configured. Go to undetermined
problem procedure.
103-151 151
The time-of-day battery failed.
1. Go to “
Removing the battery ” on page 224 to start the battery replacement procedure.
2. Go to “ Installing the battery ” on page 225 to complete the procedure.
109-200
The system crashed while you were running it.
1. Go to “
Performing the checkout procedure ” on page 149
2. If the 8-digit error and location codes were NOT reported, run AIX diagnostics in
problem determination procedure and record and report the 8-digit error and location
codes for this SRN.
110-101
The diagnostics did not detect an installed resource. If this SRN appeared when running
concurrent diagnostics, then run concurrent diagnostics using the diag -a command.
110-921 to
110-926
812 xxx
The system halted while diagnostics were executing.
Go to “
Performing the checkout procedure ” on page 149 or problem resolution.
Note: xxx corresponds to the last three digits of the SRN.
110-935 812
The system halted while diagnostics were executing. Use the problem determination
procedure.
110-xxxx xxxx 221
The system halted while diagnostics were executing.
Note: xxxx corresponds to the last three or four digits of the SRN following the dash (-).
1. If your 110 SRN is not listed, substitute the last three or four digits of the SRN for xxxx
and go to “ Failing function codes 151 through 2D02 ” on page 144 to identify the
failing feature.
2. Run stand-alone diagnostics and the problem determination procedure for your
operating system.
111-107 A machine check occurred. Go to “ Performing the checkout procedure ” on page 149
111-108
An encoded SRN was displayed. Go to “ Performing the checkout procedure ” on page 149
111-121 There is a display problem. Go to “ Performing the checkout procedure ” on page 149