Bull Escala BL460, Руководство по диагностике и обслуживанию, Страница: 53 / 266

Chapter 2. Diagnostics
33
• Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved. If an action solves the problem, then you can stop performing the remaining actions.
•
See Chapter 3 , “ Parts listing ,” on page 197 to determine which components are CRUs and which
components are FRUs.
B200 xxxx
Error codes
Description Action
1282
A problem occurred during the startup of a
partition.
Go to “ Firmware problem isolation ” on page 185 .
1320
A problem occurred during the startup of a
partition.
No default load source was selected. The
startup will attempt to continue, but there
may not be enough information to find the
correct load source.
Configure a load source for the partition. Then restart the
partition.
1321
A problem occurred during the startup of a
partition.
Verify that the correct slot is specified for the load source.
Then restart the partition.
1322
In the partition startup, code failed during a
check of the load source path.
Verify that the path for the load source is specified correctly.
Then restart the partition.
2048
A problem occurred during a partition
Main Storage Dump. A mainstore dump
startup did not complete due to a copy
error.
Go to “ Firmware problem isolation ” on page 185 .
2054
A problem occurred during a partition
Main Storage Dump. A mainstore dump
startup did not complete due to a
configuration mismatch.
Go to “ Firmware problem isolation ” on page 185 .
2058
A problem occurred during a partition
Main Storage Dump. A mainstore dump
startup did not complete due to a copy
error.
Go to “ Firmware problem isolation ” on page 185 .
2210 Informational system log entry only. No corrective action is required.
2220 Informational system log entry only. No corrective action is required.
2250
During the startup of a partition, an attempt
to toggle the power state of a slot has
failed.
Check for server firmware updates; then, install the updates
if available.
2260
During the startup of a partition, the
partition firmware attempted an operation
that failed.
Go to “ Firmware problem isolation ” on page 185 .
2300
During the startup of a partition, an attempt
to toggle the power state of a slot has
failed.
Check for server firmware updates; then, install the updates
if available.
2310
During the startup of a partition, the
partition firmware attempted an operation
that failed.
Go to “ Firmware problem isolation ” on page 185 .
2320
During the startup of a partition, the
partition firmware attempted an operation
that failed.
Go to “ Firmware problem isolation ” on page 185 .
2425
During the startup of a partition, the
partition firmware attempted an operation
that failed.
Go to “ Firmware problem isolation ” on page 185 .
2426
During the startup of a partition, the
partition firmware attempted an operation
that failed.
Go to “ Firmware problem isolation ” on page 185 .
2475
During the startup of a partition, a slot that
was needed for the partition was either
empty or the device in the slot has failed.
Check for server firmware updates; then, install the updates
if available.
2485
During the startup of a partition, the
partition firmware attempted an operation
that failed.
Go to “ Firmware problem isolation ” on page 185 .
3000 Informational system log entry only. No corrective action is required.