Bull Escala BL460, Руководство по диагностике и обслуживанию, Страница: 162 / 266

142
Escala BL460 - Problem Determination and Service Guide
SRN FFC Description and action
ssss-110 ssss
The media format is corrupted.
1. Check the management-module event log. If an error was recorded by the system,
see “ POST progress codes (checkpoints) ” on page 71 .
2. Replace any parts reported by the diagnostic program.
3. Replace the system board and chassis assembly, as described in “
Replacing the Tier
2 system-board and chassis assembly ” on page 229 .
ssss-112 ssss
The diagnostic test failed.
1. Check the management-module event log. If an error was recorded by the system,
see “ POST progress codes (checkpoints) ” on page 71 .
2. Replace any parts reported by the diagnostic program.
3. Replace the system board and chassis assembly, as described in “
Replacing the Tier
2 system-board and chassis assembly ” on page 229 .
ssss-114 ssss
An unrecoverable hardware error.
1. Check the management-module event log. If an error was recorded by the system,
see “ POST progress codes (checkpoints) ” on page 71 .
2. Replace any parts reported by the diagnostic program.
3. Replace the system board and chassis assembly, as described in “
Replacing the Tier
2 system-board and chassis assembly ” on page 229 .
ssss-116 Ssss
A protocol error.
1. Make sure that the device, adapter and diagnostic firmware, and the application
software levels are compatible.
2. If you do not find a problem, call your operating-system support person.
ssss-117 ssss
A write-protect error occurred.
1. Check the management-module event log. If an error was recorded by the system,
see “ POST progress codes (checkpoints) ” on page 71 .
2. Replace any parts reported by the diagnostic program.
3. Replace the system board and chassis assembly, as described in “
Replacing the Tier
2 system-board and chassis assembly ” on page 229 .
ssss-118 ssss 252B
A SCSD command time-out occurred.
1. Check the management-module event log. If an error was recorded by the system,
see “ POST progress codes (checkpoints) ” on page 71 .
2. Replace any parts reported by the diagnostic program.
3. Replace the system board and chassis assembly, as described in “
Replacing the Tier
2 system-board and chassis assembly ” on page 229 .
ssss-120 ssss
A SCSD busy or command error.
1. Check the management-module event log. If an error was recorded by the system,
see “ POST progress codes (checkpoints) ” on page 71 .
2. Replace any parts reported by the diagnostic program.
3. Replace the system board and chassis assembly, as described in “
Replacing the Tier
2 system-board and chassis assembly ” on page 229 .
ssss-122 ssss
A SCSD reservation conflict error.
1. Check the management-module event log. If an error was recorded by the system,
see “ POST progress codes (checkpoints) ” on page 71 .
2. Replace any parts reported by the diagnostic program.
3. Replace the system board and chassis assembly, as described in “
Replacing the Tier
2 system-board and chassis assembly ” on page 229 .
ssss-124 ssss
A SCSD check condition error occurred.
1. Check the management-module event log. If an error was recorded by the system,
see “ POST progress codes (checkpoints) ” on page 71 .
2. Replace any parts reported by the diagnostic program.
3. Replace the system board and chassis assembly, as described in “
Replacing the Tier
2 system-board and chassis assembly ” on page 229 .