Bull Escala BL460, Руководство по диагностике и обслуживанию, Страница: 50 / 266

30
Escala BL460 - Problem Determination and Service Guide
•
Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved. If an action solves the problem, then you can stop performing the remaining actions.
•
See Chapter 3 , “ Parts listing ,” on page 197 to determine which components are CRUs and which
components are FRUs.
Attention
code
Description
Action
AA260003
Enter System Unique ID (Must be
12 characters)
Enter the system unique ID number at the prompt.
AA260004
Enter WorldWide Port Number
(Must be 12 characters)
Enter the worldwide port number of the blade server at the prompt.
AA260005
Enter Brand (Must be 2
characters)
Enter the brand number of the blade server at the prompt.
2.4.1.7 Bxxxxxxx Service processor early termination SRCs
A B181xxxx system reference code (SRC) is an error code that is related to an event or
exception that occurred in the service processor firmware.
Table 2-10 describes error codes that might occur if POST detects a problem. The
description also includes suggested actions to correct the problem.
Note For problems persisting after completing the suggested actions, see “ Solving undetermined
problems ” on page 194 .
Table 2-10.
B181xxxx Service processor early termination SRCs
B181 xxxx
Error Codes
Description Action
7200 Invalid boot request
7201 Service processor failure
7202
The permanent and temporary firmware
sides are both marked invalid
7203 Error setting boot parameters
7204 Error reading boot parameters
7205 Boot code error
7206 Unit check timer was reset
7207 Error reading from NVRAM
7208 Error writing to NVRAM
7209
The service processor boot watchdog
timer expired and forced the service
processor to attempt a boot from the other
firmware image in the service processor
flash memory
720A
Power-off reset occurred. FipsDump
should be analyzed: Possible software
problem
Go to “ Checkout procedure ” on page 148 .