Bull Escala BL460, Руководство по диагностике и обслуживанию, Страница: 81 / 266

Chapter 2. Diagnostics
61
• Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved. If an action solves the problem, then you can stop performing the remaining actions.
•
See Chapter 3 , “ Parts listing ,” on page 197 to determine which components are CRUs and which
components are FRUs.
Error code Description Action
BA153003 Gigabit Ethernet adapter failure
1. Check for server firmware updates; then, install the
updates if available.
2. Replace the Gigabit Ethernet adapter.
BA154010 HEA software error
1. Go to “ Checkout procedure ” on page 148 .
2. Replace the system-board and chassis assembly, as
described in “ Replacing the Tier 2 system-board and
chassis assembly ” on page 229 .
BA154020
The required open firmware property was
not found.
1. Reboot the blade server.
2. If the problem persists:
a. Go to “ Checkout procedure ” on page 148 .
b. Replace the system-board and chassis assembly, as
described in “ Replacing the Tier 2 system-board and
chassis assembly ” on page 229 .
BA154030
Invalid parameters were passed to the
HEA device driver.
1. Reboot the blade server.
2. If the problem persists:
a. Go to “
Checkout procedure ” on page 148 .
b. Replace the system-board and chassis assembly, as
described in “ Replacing the Tier 2 system-board and
chassis assembly ” on page 229 .
BA154040 The TFTP package open failed
1. Reboot the blade server.
2. If the problem persists:
a. Go to “ Checkout procedure ” on page 148 .
b. Replace the system-board and chassis assembly, as
described in “ Replacing the Tier 2 system-board and
chassis assembly ” on page 229 .
BA154050 The transmit operation failed.
1. Reboot the blade server.
2. If the problem persists:
a. Go to “ Checkout procedure ” on page 148 .
b. Replace the system-board and chassis assembly, as
described in “ Replacing the Tier 2 system-board and
chassis assembly ” on page 229 .
BA154060 Failed to initialize the HEA port or queue
1. Reboot the blade server.
2. If the problem persists:
a. Go to “ Checkout procedure ” on page 148 .
b. Replace the system-board and chassis assembly, as
described in “ Replacing the Tier 2 system-board and
chassis assembly ” on page 229 .
BA154070 The receive operation failed.
1. Reboot the blade server.
2. If the problem persists:
a. Go to “ Checkout procedure ” on page 148 .
b. Replace the system-board and chassis assembly, as
described in “ Replacing the Tier 2 system-board and
chassis assembly ” on page 229 .
BA170000
NVRAMRC initialization failed; device
test failed
1. Go to “ Checkout procedure ” on page 148 .
2. Replace the system-board and chassis assembly, as
described in “ Replacing the Tier 2 system-board and
chassis assembly ” on page 229 .
BA170100 NVRAM data validation check failed
1. Shut down the blade server; then, restart it.
2. If the problem persists:
a. Go to “ Checkout procedure ” on page 148 .
b. Replace the system-board and chassis assembly, as
described in “ Replacing the Tier 2 system-board and
chassis assembly ” on page 229 .