Bull Escala BL460, Руководство по диагностике и обслуживанию, Страница: 159 / 266

Chapter 2. Diagnostics
139
SRN Description FRU/action
A1D-13x
A non-critical error has been detected, a
service processor error accessing a thermal
sensor.
1. Check the management-module event log; if an error
was recorded by the system, see “ POST progress
codes (checkpoints) ” on page 71 .
2. If no entry is found, replace the system-board and
chassis assembly.
A1D-18x
A non-critical error has been detected, a
service processor detected NVRAM error.
1. Check the management-module event log; if an error
was recorded by the system, see “ POST progress
codes (checkpoints) ” on page 71 .
2. If no entry is found, replace the system-board and
chassis assembly.
A1D-19x
A non-critical error has been detected, a
service processor error accessing real time
clock/time-of-day clock.
1. Check the management-module event log; if an error
was recorded by the system, see “ POST progress
codes (checkpoints) ” on page 71 .
2. If no entry is found, replace the system-board and
chassis assembly.
A1D-20x
A non-critical error has been detected:
Service processor error accessing scan
controller/hardware.
1. Check the management-module event log; if an error
was recorded by the system, see “ POST progress
codes (checkpoints) ” on page 71 .
2. If no entry is found, replace the system-board and
chassis assembly.
A1D-21x
A non-critical error has been detected, a
service processor detected error with time-of-
day clock backup battery.
1. Check the management-module event log; if an error
was recorded by the system, see “ POST progress
codes (checkpoints) ” on page 71 .
2. If no entry is found, replace the system-board and
chassis assembly.
A1D-23x
A non-critical error has been detected: Loss
of heart beat from Service Processor.
1. Check the management-module event log; if an error
was recorded by the system, see “ POST progress
codes (checkpoints) ” on page 71 .
2. If no entry is found, replace the system-board and
chassis assembly.
A1D-24x
A non-critical error has been detected, a
service processor detected a surveillance
time-out.
1. Check the management-module event log; if an error
was recorded by the system, see “ POST progress
codes (checkpoints) ” on page 71 .
2. If no entry is found, replace the system-board and
chassis assembly.
A1D-29x
A non-critical error has been detected, a
service process error accessing power control
network.
1. Check the management-module event log; if an error
was recorded by the system, see “ POST progress
codes (checkpoints) ” on page 71 .
2. If no entry is found, replace the system-board and
chassis assembly.
A1D-30x
A non-critical error has been detected: Non-
supported hardware.
1. Check the management-module event log; if an error
was recorded by the system, see “ POST progress
codes (checkpoints) ” on page 71 .
2. If no entry is found, replace the system-board and
chassis assembly.
A1D-31x
A non-critical error has been detected: Error
detected while handling an
attention/interrupt from the system hardware.
1. Check the management-module event log; if an error
was recorded by the system, see “ POST progress
codes (checkpoints) ” on page 71 .
2. If no entry is found, replace the system-board and
chassis assembly.
A1D-34x
A non-critical error has been detected: Wire
Test Error.
1. Check the management-module event log; if an error
was recorded by the system, see “ POST progress
codes (checkpoints) ” on page 71 .
2. If no entry is found, replace the system-board and
chassis assembly.