Bull Escala BL460, Руководство по диагностике и обслуживанию, Страница: 192 / 266

172
Escala BL460 - Problem Determination and Service Guide
•
Follow the suggested actions in the order in which they are listed in the Action column until the problem is solved.
•
See Chapter 3 , “ Parts listing ,” on page 197 to determine which components are CRUs and which components are
FRUs.
• If an action step is preceded by “(Trained service technician only),” that step must be performed only by a trained
service technician.
Isolation
Procedure Code
Symptom Action
FSPSP04 A problem has been
detected in the service
processor firmware.
1. Verify that the operating system is running. If it is running, perform an in-
band firmware update, as described in “ Updating the firmware ” on
page 231 .
2. If the problem persists, Replace the system board and chassis assembly,
as described in “
Replacing the Tier 2 system-board and chassis
assembly
” on page 229 .
FSPSP05 The service processor
has detected a
problem in the
platform firmware.
1. Verify that the operating system is running. If it is running, perform an in-
band firmware update, as described in “ Updating the firmware ” on
page 231 .
2. If the problem persists, Replace the system board and chassis assembly,
as described in “
Replacing the Tier 2 system-board and chassis
assembly
” on page 229 .
FSPSP06 The service processor
reported a suspected
intermittent problem.
Contact Bull Support.
FSPSP07 The time of day has
been reset to the
default value.
1. Use the chdate command to set the VIOS date and time, using one of the
following syntaxes:
chdate [-year YYyy]
[-month mm]
[-day dd]
[-hour HH]
[-minute MM]
[-timezone TZ]
chdate mmddHHMM[YYyy|yy]
[-timezone TZ]
2. If the problem persists, replace the battery, as described in “
Removing
the battery
” on page
224
and “ Installing the battery ” on page 225 .