Bull Escala BL460, Руководство по диагностике и обслуживанию, Страница: 74 / 266

54
Escala BL460 - Problem Determination and Service Guide
• Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved. If an action solves the problem, then you can stop performing the remaining actions.
•
See Chapter 3 , “ Parts listing ,” on page 197 to determine which components are CRUs and which
components are FRUs.
Error code Description Action
BA040050
The h-call to switch off the boot watchdog
timer failed.
1. Go to “ Checkout procedure ” on page 148 .
2. Replace the system-board and chassis assembly, as
described in “
Replacing the Tier 2 system-board and
chassis assembly
” on page 229 .
BA040060
Setting the firmware boot side for the next
boot failed.
1. Go to “ Checkout procedure ” on page 148 .
2. Replace the system-board and chassis assembly, as
described in “ Replacing the Tier 2 system-board and
chassis assembly ” on page 229 .
BA050001
Failed to reboot a partition in logical
partition mode
1. Go to “ Checkout procedure ” on page 148 .
2. Replace the system-board and chassis assembly, as
described in “ Replacing the Tier 2 system-board and
chassis assembly ” on page 229 .
BA050004
Failed to locate service processor device
tree node.
1. Go to “ Checkout procedure ” on page 148 .
2. Replace the system-board and chassis assembly, as
described in “ Replacing the Tier 2 system-board and
chassis assembly ” on page 229 .
BA05000A Failed to send boot failed message
1. Go to “ Checkout procedure ” on page 148 .
2. Replace the system-board and chassis assembly, as
described in “ Replacing the Tier 2 system-board and
chassis assembly ” on page 229 .
BA060008
No configurable adapters found by the
Remote IPL menu in the SMS utilities
This error occurs when the firmware cannot locate any LAN
adapters that are supported by the remote IPL function.
Verify that the devices in the remote IPL device list are
correct using the SMS menus.
BA06000B
The system was not able to find an
operating system on the devices in the
boot list.
go to “ Boot problem resolution ” on page 156 .
BA06000C
A pointer to the operating system was
found in non-volatile storage.
1. Go to “ Checkout procedure ” on page 148 .
2. Replace the system-board and chassis assembly, as
described in “ Replacing the Tier 2 system-board and
chassis assembly ” on page 229 .
BA060020
The environment variable “boot-device”
exceeded the allowed character limit.
1. Go to “ Checkout procedure ” on page 148 .
2. Replace the system-board and chassis assembly, as
described in “ Replacing the Tier 2 system-board and
chassis assembly ” on page 229 .
BA060021
The environment variable “boot-device”
contained more than five entries.
1. Go to “ Checkout procedure ” on page 148 .
2. Replace the system-board and chassis assembly, as
described in “ Replacing the Tier 2 system-board and
chassis assembly ” on page 229 .
BA060022
The environment variable “boot-device”
contained an entry that exceeded 255
characters in length
1. Using the SMS menus, set the boot list to the default boot
list.
2. Shut down; then, start up the blade server.
3. Use SMS menus to customize the boot list as required.
4. If the problem persists:
a. Go to “ Checkout procedure ” on page 148 .
b. Replace the system-board and chassis assembly, as
described in “ Replacing the Tier 2 system-board and
chassis assembly ” on page 229 .