Bull Escala BL460, Руководство по диагностике и обслуживанию, Страница: 105 / 266

Chapter 2. Diagnostics
85
Table 2-17.
C700xxxx Server firmware IPL status checkpoints
Progress code Description Action
C700xxxx
A problem has occurred with the system
firmware during startup.
1. Shutdown and restart the blade server from
the permanent-side image.
2. Check for updates to the system firmware.
3. Update the firmware.
4. Go to “
Checkout procedure
” on page 148 .
5.
Replace the system-board and chassis
assembly, as described in “
Replacing the
Tier 2 system-board and chassis
assembly
” on page 229 .
assembly.
2.4.2.5 CA000000 to CA2799FF Partition firmware checkpoints
The CAxx partition firmware progress codes provide information about the progress of
partition firmware as it is initializing. In some cases, a server might hang (or stall) at one of
these progress codes without displaying an 8-character system reference code (SRC).
Table 18 lists the progress codes that might be displayed during the power-on self-test
(POST), along with suggested actions to take if the system hangs on the progress code.
Only when you experience a hang condition should you take any of the actions described
for a progress code.
In the following progress codes, x can be any number or letter.
Table 2-18.
CA000000 to CA2799FF checkpoints
•
If the system hangs on a progress code, follow the suggested actions in the order in which they are listed
in the Action column until the problem is solved. If an action solves the problem, you can stop performing
theremaining actions.
• See Chapter 3 , “ Parts listing ,” on page 197 to determine which components are CRUs and which
components are FRUs.
Progress code Description Action
CA000000
Process control now owned by partition
firmware
1. Go to “
Checkout procedure
” on page 148 .
2. Replace the system-board and chassis assembly,
as described in “
Replacing the Tier 2 system-
board and chassis assembly
” on page 229 .
CA000020 Checking firmware levels
1. Go to “
Checkout procedure
” on page 148 .
2. Replace the system-board and chassis assembly,
as described in “
Replacing the Tier 2 system-
board and chassis assembly
” on page 229 .
CA000030
Attempting to establish a
communication link by using lpevents
1. Go to “
Checkout procedure
” on page 148 .
2. Replace the system-board and chassis assembly,
as described in “
Replacing the Tier 2 system-
board and chassis assembly
” on page 229 .
CA000032 Attempting to register lpevent queues
1. Go to “
Checkout procedure
” on page 148 .
2. Replace the system-board and chassis assembly,
as described in “
Replacing the Tier 2 system-
board and chassis assembly
” on page 229 .