Bull Escala BL460, Руководство по диагностике и обслуживанию, Страница: 145 / 266

Chapter 2. Diagnostics
125
SRN FFC
Description and Action
2607-203 2607
PCI Wrap Test Failure for the Fibre Channel adapter card. Replace the 8Gb PCIe Fibre
Channel Expansion Card.
2607-204 2607 221
DMA Test Failure for the Fibre Channel adapter card. Go to “ Performing the checkout
procedure ” on page 149 .
2607-205 2607 221
Error on Read/Write Operation for the Fibre Channel adapter card. Go to “ Performing the
checkout procedure ” on page 149 .
2607-701 2607
Error Log Analysis indicates that the adapter self-test failed for the Fibre Channel adapter
card. Go to “ Performing the checkout procedure ” on page 149 .
2607-703 2607
Error Log Analysis indicates that an unknown adapter error has occurred for the Fibre
Channel adapter card. Go to “ Performing the checkout procedure ” on page 149 .
2607-704 2607
Error Log Analysis indicates that an adapter error has occurred for the Fibre Channel
adapter card. Go to “ Performing the checkout procedure ” on page 149 .
2607-705 2607
Error Log Analysis indicates that a parity error has been detected for the Fibre Channel
adapter card.
The adapter must be replaced immediately. Failure to do so could result in data being read
or written incorrectly.
2607-706 2607
Error Log Analysis indicates that a fatal hardware error has occurred for the Fibre Channel
adapter card.
This adapter was successfully taken off-line. It will remain off-line until reconfigured or the
system is rebooted. This adapter must be replaced and not brought back on-line. Failure to
adhere to this action could result in data being read or written incorrectly or in the loss of
data.
2624-xxx 2624
Generic reference for 4X PCI-E DDR InfiniBand Host Channel Adapter - system-board and
chassis assembly. Go to “ Performing the checkout procedure ” on page 149 .
2624-101 2624
Configuration failure - system-board and chassis assembly. Go to “ Performing the checkout
procedure ” on page 149 .
2624-102 2624
Queue pair create failure - system-board and chassis assembly. Go to “ Performing the
checkout procedure ” on page 149 .
2624-103 2624
Loop back test failure - system-board and chassis assembly. Go to “ Performing the checkout
procedure ” on page 149 .
2624-201
Cable
network
Loop back test failure. Do the following steps one at a time, in order, and rerun the test
after each step:
1. Reseat the cable.
2. Replace the cable.
3. Verify that the network is functional.
3. Verify that the network switch is functional.
2624-301
Cable
network
2624
Loop back test failure. Do the following steps one at a time, in order, and rerun the test
after each step:
1. Reseat the cable.
2. Replace the cable.
3. Verify that the network is functional.
3. Verify that the network switch is functional.
4. Go to “
Performing the checkout procedure ” on page 149 .
2624-701 2624
Error Log Analysis indicates that this adapter has failed due to an internal error - system-
board and chassis assembly. Go to “ Performing the checkout procedure ” on page 149 .
2624-702 2624
Error Log Analysis indicates that this adapter has failed due to a failure with the uplink
interface used to connect this device to the host processor - system-board and chassis
assembly. Go to “ Performing the checkout procedure ” on page 149 .
2624-703 2624
Error Log Analysis indicates that this adapter has failed due to a memory error - system-
board and chassis assembly. Go to “ Performing the checkout procedure ” on page 149 .
2624-704 2624
Error Log Analysis indicates that this adapter has failed due to a unrecoverable internal
parity error - system-board and chassis assembly. Go to “ Performing the checkout
procedure ” on page 149 .