Bull Escala BL460, Руководство по диагностике и обслуживанию, Страница: 154 / 266

134
Escala BL460 - Problem Determination and Service Guide
SRN Description FRU/action
A12-01x
A non-critical error has been detected, an
uncorrectable memory error.
1. Check the management-module event log; if an error
was recorded by the system, see “ POST progress
codes (checkpoints) ” on page 71 .
2. If no entry is found, replace the system-board and
chassis assembly.
A12-02x
A non-critical error has been detected, an
ECC correctable error.
1. Check the management-module event log; if an error
was recorded by the system, see “ POST progress
codes (checkpoints) ” on page 71 .
2. If no entry is found, replace the system-board and
chassis assembly.
A12-03x
A non-critical error has been detected, a
correctable error threshold exceeded.
1. Check the management-module event log; if an error
was recorded by the system, see “ POST progress
codes (checkpoints) ” on page 71 .
2. If no entry is found, replace the system-board and
chassis assembly.
A12-04x
A non-critical error has been detected, a
memory control subsystem internal error.
1. Check the management-module event log; if an error
was recorded by the system, see “ POST progress
codes (checkpoints) ” on page 71 .
2. If no entry is found, replace the system-board and
chassis assembly.
A12-05x
A non-critical error has been detected, a
memory address error (invalid address
or access attempt).
1. Check the management-module event log; if an error
was recorded by the system, see “ POST progress
codes (checkpoints) ” on page 71 .
2. If no entry is found, replace the system-board and
chassis assembly.
A12-06x
A non-critical error has been detected, a
memory data error (bad data going to
memory).
1. Check the management-module event log; if an error
was recorded by the system, see “ POST progress
codes (checkpoints) ” on page 71 .
2. If no entry is found, replace the system-board and
chassis assembly.
A12-07x
A non-critical error has been detected, a
memory bus/switch internal error.
1. Check the management-module event log; if an error
was recorded by the system, see “ POST progress
codes (checkpoints) ” on page 71 .
2. If no entry is found, replace the system-board and
chassis assembly.
A12-08x
A non-critical error has been detected, a
memory time-out error.
1. Check the management-module event log; if an error
was recorded by the system, see “ POST progress
codes (checkpoints) ” on page 71 .
2. If no entry is found, replace the system-board and
chassis assembly.
A12-09x
A non-critical error has been detected, a
system bus parity error.
1. Check the management-module event log; if an error
was recorded by the system, see “ POST progress
codes (checkpoints) ” on page 71 .
2. If no entry is found, replace the system-board and
chassis assembly.
A12-10x
A non-critical error has been detected, a
system bus time-out error.
1. Check the management-module event log; if an error
was recorded by the system, see “ POST progress
codes (checkpoints) ” on page 71 .
2. If no entry is found, replace the system-board and
chassis assembly.
A12-11x
A non-critical error has been detected, a
system bus protocol/transfer error.
1. Check the management-module event log; if an error
was recorded by the system, see “ POST progress
codes (checkpoints) ” on page 71 .
2. If no entry is found, replace the system-board and
chassis assembly.
A12-12x
A non-critical error has been detected, an
I/O host bridge time-out error.
1. Check the management-module event log; if an error
was recorded by the system, see “ POST progress
codes (checkpoints) ” on page 71 .
2. If no entry is found, replace the system-board and
chassis assembly.