Bull Escala BL460, Руководство по диагностике и обслуживанию, Страница: 70 / 266

50
Escala BL460 - Problem Determination and Service Guide
• Follow the suggested actions in the order in which they are listed in the Action column until the problem is
solved. If an action solves the problem, then you can stop performing the remaining actions.
•
See Chapter 3 , “ Parts listing ,” on page 197 to determine which components are CRUs and which
components are FRUs.
Error code Description Action
BA012010 Opening the TCP node failed.
1. Reboot the blade server.
2. If the problem persists:
a. Go to “ Checkout procedure ” on page 148 .
b. Replace the system-board and chassis assembly, as
described in “
Replacing the Tier 2 system-board
and chassis assembly
” on page 229 .
BA012011 TCP failed to read from the network
1. Reboot the blade server.
2. If the problem persists:
a. Go to “ Checkout procedure ” on page 148 .
b. Replace the system-board and chassis assembly, as
described in “
Replacing the Tier 2 system-board
and chassis assembly
” on page 229 .
BA012012 TCP failed to write to the network.
1. Reboot the blade server.
2. If the problem persists:
a. Go to “ Checkout procedure ” on page 148 .
b. Replace the system-board and chassis assembly, as
described in “
Replacing the Tier 2 system-board
and chassis assembly
” on page 229 .
BA012013 Closing TCP failed.
1. Reboot the blade server.
2. If the problem persists:
a. Go to “ Checkout procedure ” on page 148 .
b. Replace the system-board and chassis assembly, as
described in “
Replacing the Tier 2 system-board
and chassis assembly
” on page 229 .
BA017020 Failed to open the TFTP package
Verify that the Trivial File Transfer Protocol (TFTP) parameters
are correct.
BA017021 Failed to load the TFTP file
Verify that the TFTP server and network connections are
correct.
BA01B010 Opening the BOOTP node failed.
1. Reboot the blade server.
2. If the problem persists:
a. Go to “ Checkout procedure ” on page 148 .
b. Replace the system-board and chassis assembly, as
described in “
Replacing the Tier 2 system-board
and chassis assembly
” on page 229 .
BA01B011 BOOTP failed to read from the network
Perform the following actions that checkpoint
CA00E174 describes:
1. Verify that:
−
The bootp server is correctly configured;
then, retry the operation.
−
The network connections are correct;
then, retry the operation.
2. If the problem persists:
a. Go to “ Checkout procedure ” on page 148 .
b. Replace the system-board and chassis assembly, as
described in “
Replacing the Tier 2 system-board
and chassis assembly
” on page 229 .