Basler BE1-CDS220, Инструкция по эксплуатации

Страница: 37 / 476

BE1-CDS220 Quick Start 2-1
SECTION 2
•
QUICK START
GENERAL
This section provides an overview of the BE1-CDS220 Current Differential System. You should be familiar
with the concepts behind the user interfaces and BESTlogic before you begin reading about the detailed
BE1-CDS220 functions. Sections 3 through 6 in this manual describe in detail each function of the BE1-
CDS220.
The following information is intended to provide the reader with a basic understanding of the three user
interfaces (front panel human-machine interface (HMI), ASCII serial communications link, and the
BESTCOMS for BE1-CDS220 software) and the security features provided in the BE1-CDS220 relay.
Detailed information on the operation of the HMI (human-machine interface) is in Section 10, and the
information on ASCII command communications is in Section 11. BESTCOMS is a Windows

based
software application (graphical user interface) that enhances communication between the PC user and
the BE1-CDS220 relay. BESTCOMS for the BE1-CDS220 is provided free of charge with the BE1-
CDS220 and details are provided in Section 14.
Also covered in this section is an overview of BESTlogic. BESTlogic is a highly flexible programmable
logic system that allows the user to apply the available functions with complete flexibility and customize
the system to meet the requirements of the protected power system. Detailed information on using
BESTlogic to design complete protection and control schemes for the protected circuit can be found in
Section 7, BESTlogic Programmable Logic, and Section 8, Application.
Sections 3 through 6 describe each function provided in the BE1-CDS220 relay and include references to
the following items. Note that not all items are appropriate for each function.
•
HMI screens for setting the operational parameters
•
ASCII commands for setting the operational parameters
•
ASCII commands for setting up the BESTlogic required to use the function in your protection and
control scheme
•
Outputs from the function such as Alarms, BESTlogic variables, and data reports
•
HMI screens for operation or interrogation of the outputs and/or reports provided by each function
•
ASCII commands for operation or interrogation of the outputs and/or reports provided by each
function
About This Manual
The various application functions provided by this multifunction relay are divided into four functional
categories: input and output functions, protection and control functions, metering functions, and reporting
and alarm functions. Detailed descriptions of each individual function, setup, and use are covered in the
Sections as shown in Table 2-1. Detailed information on using programmable logic to create your
protection and control scheme is described in Section 7, BESTlogic Programmable Logic.
Table 2-1. Sections for Functional Categories
Functional Category Section
Input and Output Functions 3
Protection and Control 4
Metering Functions 5
Reporting and Alarm Functions 6
BESTlogic Programmable Logic 7
Application 8
BESTLOGIC
Each of the protection and control elements in the BE1-CDS220 is implemented as an independent
function that is equivalent to a single function, discrete device counterpart. Each independent element
has all of the inputs and outputs that the discrete component counterpart might have. Programming
BESTlogic is equivalent to choosing the devices required by your protection and control scheme and
drawing schematic diagrams to connect the inputs and outputs to obtain the desired operational logic.