manualshive.com logo in svg

ASL INTERCOM VAR12, Руководство по эксплуатации

Операционное руководство для продукта ASL INTERCOM VAR12 доступно для скачивания бесплатно на нашем сайте. С этим подробным руководством вы с легкостью освоите функциональность устройства. Загрузите его сейчас с manualshive.com и начните пользоваться всеми преимуществами данного продукта.

Поделиться
Скачать
background image

VAR4 / VAR12 / VAR20 - Operation Manual 

sue: 03 complete, approved 

ed 

 

Is

Page 66 of 308 

Page 66 of 308 

7.  If ‘Surveyed’ has been selected, configure the number of EOL resistors on the loudspeaker line by 

selecting the 

DC Line

 menu item: 

7.  If ‘Surveyed’ has been selected, configure the number of EOL resistors on the loudspeaker line by 

selecting the 

DC Line

 menu item: 

Description  AC Level [DC Line] Earth 

Description  AC Level [DC Line] Earth 

8.  The VAR Router can read the number of EOL resistors on the loudspeaker line, and suggest this as the 

correct figure by assuming no faults are present. However it is recommended to edit manually the 
number of EOL resistors according to the installation to avoid an incorrect setting. 

8.  The VAR Router can read the number of EOL resistors on the loudspeaker line, and suggest this as the 

correct figure by assuming no faults are present. However it is recommended to edit manually the 
number of EOL resistors according to the installation to avoid an incorrect setting. 

Note:

  In these VAR Router screen displays the number of EOL resistors is referred to as ‘spurs’. This 

is because there must be an EOL resistor at the end of every spur on the loudspeaker circuit. 
However improved fault reporting can be obtained on long loudspeaker lines by fitting EOL 
resistors at regular intervals in long single runs. Therefore there may be more EOL resistors 
than spurs. 

Note:

  In these VAR Router screen displays the number of EOL resistors is referred to as ‘spurs’. This 

is because there must be an EOL resistor at the end of every spur on the loudspeaker circuit. 
However improved fault reporting can be obtained on long loudspeaker lines by fitting EOL 
resistors at regular intervals in long single runs. Therefore there may be more EOL resistors 
than spurs. 

9.  To read the current number of EOL resistors select the 

Read

 menu item: 

9.  To read the current number of EOL resistors select the 

Read

 menu item: 

Surveyed  Spurs=00 [Read] 

Surveyed  Spurs=00 [Read] 

Note:

  ‘Read’ is only possible if ‘Surveyed’ has previously been configured. 

Note:

  ‘Read’ is only possible if ‘Surveyed’ has previously been configured. 

a.  The number of EOL resistors on the loudspeaker line calculated from the DC line resistance 

reading is presented to the LCD display: 

a.  The number of EOL resistors on the loudspeaker line calculated from the DC line resistance 

reading is presented to the LCD display: 

[Spurs=3.1] 

[Spurs=3.1] 

  

  

The automatic updates to the VAR Router LCD screen occur at a slow rate of about every 
50 seconds, due to the time taken for the surveillance boards to take these readings. 

The automatic updates to the VAR Router LCD screen occur at a slow rate of about every 
50 seconds, due to the time taken for the surveillance boards to take these readings. 

!

!

 

 

 

b.  Pressing the SELECT key will load the number of EOL resistors calculated into the DC line 

surveillance ‘spurs’ variable, and return to the ‘Line Surveillance’ menu which will display that 
number of EOL resistors.  

Surveyed [Spurs=3] Read 

10.  To edit, move to the ‘Spurs’ field and scroll it until the required value is displayed. 

Surveyed [Spurs=00] Read 

Default value:  

‘00’ 

Possible slots:   ‘00’ to ‘10’ EOL resistors 

Note:

  The maximum value for ‘spurs’ is 10, as no more than 10 EOL resistors can be used on one 

amplifier. 

11.  Commission the amplifier with the selected number of EOL resistors by pressing the SELECT key, or 

cancel by pressing the BACK key. 

The system will return to the parent menu after 3 seconds on pressing the SELECT key, or immediately 
by pressing the BACK key. 

Note:

  Once commissioned the selected mainframe will use the new commissioned limits for fault 

detection. 

 

 

 

Содержание VAR12





















































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для VAR12

Observint N16 Quick Setup Manual preview
N16
Бренд: Observint Страницы: 11
STONEFLY DR365V-2404 Setup Manual preview
DR365V-2404
Бренд: STONEFLY Страницы: 48
Toto Link IP04229 User Manual preview
IP04229
Бренд: Toto Link Страницы: 55
insys icom EBW-E Quick Installation Manual preview
EBW-E
Бренд: insys icom Страницы: 4
EVOC 6336-STG-YX Manual preview
6336-STG-YX
Бренд: EVOC Страницы: 57
Dahua D-NVR4108HS-4KS2/L Quick Start Manual preview
D-NVR4108HS-4KS2/L
Бренд: Dahua Страницы: 33
Riverbed SteelCentral AppResponse 2180 Upgrade And Maintenance Manual preview
SteelCentral AppResponse 2180
Бренд: Riverbed Страницы: 82
TP-Link L-R480T+ User Manual preview
L-R480T+
Бренд: TP-Link Страницы: 131
Concept Pro DEEP LEARNING PLUS Quick Start Manual preview
DEEP LEARNING PLUS
Бренд: Concept Pro Страницы: 28
ADTRAN NetVanta Analog Modem Dial Backup Interface Module Quick Start Manual preview
NetVanta Analog Modem Dial Backup Interface Module
Бренд: ADTRAN Страницы: 2
Hanwha Techwin Wisenet XRN-6410RB2-24TB User Manual preview
Wisenet XRN-6410RB2-24TB
Бренд: Hanwha Techwin Страницы: 124
Maestro Wireless Solution E220 Series Quick Start Manual preview
E220 Series
Бренд: Maestro Wireless Solution Страницы: 22
TRENDnet TEW-WLC100P User Manual preview
TEW-WLC100P
Бренд: TRENDnet Страницы: 57
Genexis FiberTwist XGS2420 Installation Manual preview
FiberTwist XGS2420
Бренд: Genexis Страницы: 7
VERTO 52G710 Instruction Manual preview
52G710
Бренд: VERTO Страницы: 48
Network Instruments WAN Probe Kit Installation & Quick Start Manual preview
WAN Probe Kit
Бренд: Network Instruments Страницы: 44
Moxa Technologies PowerTrans PT-7728 Hardware Installation Manual preview
PowerTrans PT-7728
Бренд: Moxa Technologies Страницы: 8
Renesas Temporary Target Board M38517T-ADS User Manual preview
Temporary Target Board M38517T-ADS
Бренд: Renesas Страницы: 14

Бренды по названию

Популярные бренды

Загрузить еще бренды