VAR4 / VAR12 / VAR20 - Operation Manual
Is
Page 19 of 308
sue: 03 complete, approved
Table 5
Configuration Checklist
Check
(
3
)
Configuration Task
Refer to
Section
Page
Access the VAR Router.
4 20
Configure the required VAR Router parameters.
5 23
Program the VAR Router for stand-alone or network operation.
5.1 23
If the VAR Router is networked, program Fallback DVAs in the
event of Network Failure.
5.1.3.11 39
Establish communication between VAR Router and Amplifier
System.
6.1 52
Commission the Amplifier Mainframe.
6.3 56
Program any input sources used to support microphones or
other audio sources.
7.1 73
Assign (lower) priorities to paging microphones and
miscellaneous audio input.
7.2.1 75
Configure the required microphone parameters.
7.2.9
to
7.2.12 91
to
96
Program the Microphone Listen-in key-switch (if required)
7.3.3 102
Program buttons for Microphones.
7.3.4 105
Program the Microphone Security key-switch (if required)
7.3.4.5 133
Program PTT zones for Single Button Microphones.
7.4.1 135
Assign priority to the DVA messages.
8.3 139
Configure the required DVA input name and audio parameters.
8.5
to
8.6 145
to
146
Assign priority to the background music (lowest).
9.1.5 154
Configure the required background music name and audio
parameters.
9.1.7
to
9.1.8 155
to
156
Program the Music Selector contact (if used).
9.2 158
Configure VAR Router output ANS and audio parameters.
12 167
Program the zone names.
12.6 178
Program DVA triggers via Contacts (if used).
14 193
Configure any permanent routes.
15 217
Configure any Remote I/O on the RS485 bus.
16.1 219
Configure the functionality of Remote I/O analogue inputs:
Programme Selector, Volume Control, or ANS (if used).
16.2 221
Configure the Remote I/O digital inputs (contacts) for Routing or
External Fault (if used).
16.3 236
Configure the Remote I/O digital outputs (if used).
16.4 256
Program the Night Time Volume Control function
17 259
Содержание VAR12
Страница 308: ......
