ASL INTERCOM VAR12 Скачать руководство пользователя страница 22

Страница: 22 / 308

VAR4 / VAR12 / VAR20 - Operation Manual

sue: 03 complete, approved

Page 22 of 308

4.4

Changing the System Access Code

4.4

Changing the System Access Code

The access code can only be changed if the user is logged onto the system with full access, i.e, as User 2.

In order to change the access code proceed as follows.

1. Select

Configuration

Access

Change-Code

1. Select

Configuration

Access

Change-Code

Note:

When logged on as User 1, this sub-menu is not displayed.

Note:

When logged on as User 1, this sub-menu is not displayed.

When logged on as User 2, this sub-menu is only displayed if changing of the access code has
been allowed through the front panel; see Section “

5.9.4 Password Control Configuration

”.

When logged on as User 2, this sub-menu is only displayed if changing of the access code has
been allowed through the front panel; see Section “

5.9.4 Password Control Configuration

”.

2. Move to, and select the user whose access code will be changed.

[User 1] User 2

3. Use the rotary encoder and arrow keys to enter the new access code:

[9999]

4. Save the changes by pressing the SELECT key, or cancel by pressing the BACK key.

Note:

On changing the access code, a warning message may be displayed, depending on the

password control settings, see in Section “

5.9.4 Password Control Configuration

”.

Note:

On changing the access code, a warning message may be displayed, depending on the

password control settings, see in Section “

5.9.4 Password Control Configuration

”.

Reference to Configuration Tool

4.4

User 2

User 1

Содержание VAR12





















































































































































































































































































































Результаты поиска

Содержание VAR12

Отзывы:

Похожие инструкции для VAR12

Бренды по названию

Популярные бренды

ASL INTERCOM VAR12, Руководство по эксплуатации

Результаты поиска

Содержание VAR12

Отзывы:

Похожие инструкции для VAR12

Бренды по названию

Популярные бренды