ASL INTERCOM VAR12 Скачать руководство пользователя страница 272

Страница: 272 / 308

VAR4 / VAR12 / VAR20 - Operation Manual

Page 272 of 308

2. Scroll and select a mainframe from the list:

The mainframe description will be shown on the right side, if defined.

3. Move to, and select the

Measured

menu item.

sue: 03 complete, approved

18.4.6

Mains Derived DC Supply Feeding Slots 3 and 4

The mains derived DC supply voltage feeding slots 3 and 4 in a mainframe can be displayed, as described in
the following steps.

1. Select

Tests

Status

2. Scroll and select a mainframe from the list:

[Frame#nn - ]

Mainframe: 01 to 63

Note:

Only configured mainframes are displayed.

The mainframe description will be shown on the right side, if defined.

3. Move to, and select the

Measured

menu item.

DIP = 000000 [Measured] Slot#1

4. Move to, and select the

DC2

menu item:

BAT B1 B2 DC1 [DC2] AUX Temp

5. The DC supply voltage is displayed:

[DC Monitor 2 Volts= 20.4]

6. Return to the parent menu by pressing the SELECT key, or the BACK key.

18.4.7

Auxiliary DC Supply Voltage

The Auxiliary DC supply voltage in a mainframe can be displayed, as described in the following steps.

1. Select

Tests

Status

[Frame#nn - ]

Mainframe: 01 to 63

Note:

Only configured mainframes are displayed.

DIP = 000000 [Measured] Slot#1

4. Move to, and select the

AUX

menu item:

BAT B1 B2 DC1 DC2 [AUX] Temp

5. The Auxiliary DC supply voltage is displayed:

[AUX Supply Volts= 15.7]

6. Return to the parent menu by pressing the SELECT key, or the BACK key.

Содержание VAR12





















































































































































































































































































































Результаты поиска

Содержание VAR12

Отзывы:

Похожие инструкции для VAR12

Бренды по названию

Популярные бренды

ASL INTERCOM VAR12, Руководство по эксплуатации

Результаты поиска

Содержание VAR12

Отзывы:

Похожие инструкции для VAR12

Бренды по названию

Популярные бренды