![background image](http://html1.mh-extra.com/html/abb/acs880-x04/acs880-x04_firmware-manual_3389539407.webp)
Parameters 407
Even
Even parity indication bit, one stop bit.
1
(Visible when an absolute encoder is selected)
Defines the transfer rate of the link with a HIPERFACE
encoder.
Typically this parameter need not be set.
4800 bits/s
4800 bit/s.
0
9600 bits/s
9600 bit/s.
1
19200 bits/s
19200 bit/s.
2
38400 bits/s
38400 bit/s.
3
(Visible when an absolute encoder is selected)
Defines the node address for a HIPERFACE encoder.
Typically this parameter need not be set.
64
0…255
HIPERFACE encoder node address.
-
93
Settings for encoder 2.
Notes:
• The contents of the parameter group vary according to the
selected encoder type.
• It is recommended that encoder connection 1 (group
) is used whenever possible since
the data received through that interface is fresher than the
data received through connection 2 (this group).
Selects the type of encoder/resolver 2.
None configured
None.
0
TTL
TTL. Module type (input): FEN-01 (X31), FEN-11 (X41) or
FEN-21 (X51).
1
TTL+
TTL+. Module type (input): FEN-01 (X32).
2
Absolute encoder
Absolute encoder. Module type (input): FEN-11 (X42).
3
Resolver
Resolver. Module type (input): FEN-21 (X52).
4
HTL
HTL. Module type (input): FEN-31 (X82).
5
HTL 1
HTL. Module type (input): FSE-31 (X31).
6
HTL 2
HTL. Module type (input): FSE-31 (X32). Not supported at the
time of publication.
7
Selects the interface module that the encoder is connected to.
(The physical locations and types of encoder interface
modules are defined in parameter group
.)
Module 1
Interface module 1.
1
Module 2
Interface module 2.
2
(Visible when a TTL, TTL+ or HTL encoder is selected)
See parameter
2048
(Visible when an absolute encoder is selected)
See parameter
.
0
(Visible when a resolver is selected)
See parameter
.
1 kHz
(Visible when a TTL, TTL+ or HTL encoder is selected)
See parameter
No.
Name/Value
Description
Def
/
FbEq16
Содержание ACS880-x04
