![background image](http://html1.mh-extra.com/html/abb/acs880-x04/acs880-x04_firmware-manual_3389539291.webp)
Parameters 291
Configures value counter 1.
0000b
0000b…0011b
Value counter 1 configuration word.
1 = 1
Selects the signal to be monitored by value counter 1.
Not selected
None (counter disabled).
0
Motor speed
(see page
).
1
Source selection (see
). -
Defines a divisor for value counter 1. The value of the
monitored signal is divided by this value before integration.
1.000
0.001 …
2147483.000
Divisor for value counter 1.
-
Selects the optional warning message for value counter 1.
Value counter 1
exceeded
. The message text can be edited on the
control panel by choosing Menu – Settings – Edit texts.
4
Maintain motor
bearing
.
10
Displays the actual present value of value counter 2.
The value of the source selected by parameter
is read at one-second intervals and added to
the counter. A divisor can be applied to the count (see
When the counter exceeds the limit set by
, bit 5 of
is set to 1.
The warning specified by
is also given if enabled by
.
The counter can be reset from the Drive composer PC tool, or
from the control panel by keeping Reset depressed for over 3
seconds.
-
-2147483008 …
2147483008
Actual present value of value counter 2.
-
No.
Name/Value
Description
Def
/
FbEq16
Bit
Function
0
Counter mode
0 = Loop: When the limit is reached, the counter is reset. The counter status (bit 4 of
) switches to 1 for one second. The warning (if enabled) stays active for at least 10
seconds.
1 = Saturate: When the limit is reached, the counter status (bit 4 of
) switches to 1,
is reset. The warning (if enabled) also stays active until
is reset.
1
Warning enable
0 = Disable: No warning is given when the limit is reached
1 = Enable: A warning (see
) is given when the limit is reached
2…15
Reserved
Содержание ACS880-x04
