![background image](http://html1.mh-extra.com/html/abb/acs880-x04/acs880-x04_firmware-manual_3389539128.webp)
128 Parameters
Selects the hexadecimal code of an event (warning, fault or
pure event) whose status is shown as bit 0 of
. The event codes are listed in chapter
0000h
0000h…FFFFh
Code of event.
1 = 1
Specifies an auxiliary code for the event selected by the
previous parameter. The selected event is indicated by the
event word only if its auxiliary code matches the value of this
parameter.
With a value of 0000 0000h, the event word will indicate the
event regardless of the auxiliary code.
0000 0000h
0000 0000h …
FFFF FFFFh
Code of warning, fault or pure event.
1 = 1
Selects the hexadecimal code of an event (warning, fault or
pure event) whose status is shown as bit 1 of
. The event codes are listed in chapter
0000h
0000h…FFFFh
Code of event.
1 = 1
Specifies an auxiliary code for the event selected by the
previous parameter. The selected event is indicated by the
event word only if its auxiliary code matches the value of this
parameter.
With a value of 0000 0000h, the event word will indicate the
event regardless of the auxiliary code.
0000 0000h
0000 0000h …
FFFF FFFFh
Code of warning, fault or pure event.
1 = 1
…
…
…
…
Selects the hexadecimal code of an event (warning, fault or
pure event) whose status is shown as bit 15 of
. The event codes are listed in chapter
0000h
0000h…FFFFh
Code of event.
1 = 1
Specifies an auxiliary code for the event selected by the
previous parameter. The selected event is indicated by the
event word only if its auxiliary code matches the value of this
parameter.
With a value of 0000 0000h, the event word will indicate the
event regardless of the auxiliary code.
0000 0000h
0000 0000h …
FFFF FFFFh
Code of warning, fault or pure event.
1 = 1
Selects whether the bit assignments of parameters
correspond to the ACS800 Standard control
program or the ACS800 System control program.
ACS800 Standard
ctrl program
The bit assignments of parameters
correspond
to the ACS800 Standard control program as follows:
: 03.05 FAULT WORD 1
: 03.06 FAULT WORD 2
: 03.08 ALARM WORD 1
: 03.09 ALARM WORD 2
0
No.
Name/Value
Description
Def
/
FbEq16
Содержание ACS880-x04
