![background image](http://html1.mh-extra.com/html/abb/acs880-x04/acs880-x04_firmware-manual_3389539219.webp)
Parameters 219
Defines the maximum value of the motor potentiometer.
1500.00
-32768.00 …
32767.00
Motor potentiometer maximum.
1 = 1
Displays the output of the motor potentiometer function. (The
motor potentiometer is configured using parameters
…
.)
This parameter is read-only.
-
-32768.00 …
32767.00
Value of motor potentiometer.
1 = 1
Displays the value of speed reference source 1 (selected by
parameter
). See the control chain
diagram on page
.
This parameter is read-only.
-
-30000.00 …
30000.00 rpm
Value of reference source 1.
See par.
Displays the value of speed reference source 2 (selected by
parameter
). See the control chain
diagram on page
.
This parameter is read-only.
-
-30000.00 …
30000.00 rpm
Value of reference source 2.
See par.
Displays the value of speed reference after the mathematical
function applied by parameter
and
reference 1/2 selection (
). See
the control chain diagram on page
.
This parameter is read-only.
-
-30000.00 …
30000.00 rpm
Speed reference after source selection.
See par.
Displays the value of speed reference after application of 1st
speed additive (
). See the
control chain diagram on page
This parameter is read-only.
-
-30000.00 …
30000.00 rpm
Speed reference after additive 1.
See par.
Displays the value of speed reference after the application of
the speed share scaling factor (
). See the
control chain diagram on page
This parameter is read-only.
-
-30000.00 …
30000.00 rpm
Speed reference after speed share scaling.
See par.
Displays the value of speed reference after application of 2nd
speed additive (
). See the
control chain diagram on page
This parameter is read-only.
-
-30000.00 …
30000.00 rpm
Speed reference after additive 2.
See par.
No.
Name/Value
Description
Def
/
FbEq16
Содержание ACS880-x04
