![background image](http://html1.mh-extra.com/html/abb/acs880-x04/acs880-x04_firmware-manual_3389539025.webp)
Program features 25
4
Program features
What this chapter contains
The control program contains all of the parameters (including actual signals) within
the drive. This chapter describes some of the more important functions within the
control program, how to use them and how to program them to operate.
WARNING!
Make sure that the machinery into which the drive is integrated
fulfils the personnel safety regulations. Note that the frequency converter (a
Complete Drive Module or a Basic Drive Module, as defined in IEC 61800-2), is not
considered as a safety device mentioned in the European Machinery Directive and
related harmonized standards. Thus, the personnel safety of the complete machinery
must not be based on a specific frequency converter feature, but it has to be
implemented as defined in the application specific regulations.
Содержание ACS880-x04
