![background image](http://html1.mh-extra.com/html/abb/acs880-x04/acs880-x04_firmware-manual_3389539398.webp)
398 Parameters
DIO1
Digital input/output DIO1 (
, bit 0).
10
DIO2
Digital input/output DIO2 (
, bit 1).
11
). -
91
Configuration of encoder interface modules.
Displays the status of the digital inputs of FEN-xx encoder
interface modules.
This parameter is read-only.
-
0000 0000b …
0011 0011b
Status word of digital inputs on FEN-xx modules.
1 = 1
Displays the type of the interface module found in the location
specified by parameter
.
This parameter is read-only.
-
No option
No module detected in the specified slot.
0
No communication
A module has been detected but cannot be communicated
with.
1
Unknown
The module type is unknown.
2
FEN-01
An FEN-01 module has been detected and is active.
16
FEN-11
An FEN-11 module has been detected and is active.
17
FEN-21
An FEN-21 module has been detected and is active.
18
FEN-31
An FEN-31 module has been detected and is active.
21
FSE-31
An FSE-31 module has been detected and is active.
25
Displays the type of the interface module found in the location
specified by parameter
.
For the indications, see parameter
.
This parameter is read-only.
-
Displays the temperature measured through the sensor input
of interface module 1. The unit is selected by parameter
.
Note:
With a PTC sensor, the unit is ohms.
This parameter is read-only.
-
0…1000 °C, °F or
ohm
Temperature measured through interface module 1.
-
No.
Name/Value
Description
Def
/
FbEq16
Bit
Name
Information
0
DI1 /module 1
DI1 of interface module 1 (see parameters
1
DI2 /module 1
DI2 of interface module 1 (see parameters
2…3
Reserved
4
DI1 /module 2
DI1 of interface module 2 (see parameters
)
5
DI2 /module 2
DI2 of interface module 2 (see parameters
)
6…15
Reserved
Содержание ACS880-x04
