![background image](http://html1.mh-extra.com/html/abb/acs880-x04/acs880-x04_firmware-manual_3389539514.webp)
514 Fault tracing
000E Encoder reported a position
counter error
See the documentation of the encoder.
000F Encoder reported an internal
error
See the documentation of the encoder.
A7EE Control panel loss
Programmable warning:
Control panel (or PC tool) has
stopped communicating.
Check PC tool or control panel
connection.
Check control panel connector.
Check mounting platform if being used.
Disconnect and reconnect the control
panel.
A880
Motor bearing
Programmable warnings:
Warning generated by an on-
time timer or a value counter.
Check the auxiliary code. Check the
source of the warning corresponding to
the code:
0:
A881
Output relay
Warning generated by an edge
counter.
Programmable warnings:
Check the auxiliary code. Check the
source of the warning corresponding to
the code:
2:
A882
Motor starts
A883
Power ups
A884
Main contactor
A885
DC charge
A886
On-time 1
(Editable message text)
Programmable warning:
Warning generated by on-time
timer 1.
Check the source of the warning
(parameter
A887
On-time 2
(Editable message text)
Programmable warning:
Warning generated by on-time
timer 2.
Check the source of the warning
(parameter
A888
Edge counter 1
(Editable message text)
Programmable warning:
Warning generated by edge
counter 1.
Check the source of the warning
(parameter
).
A889
Edge counter 2
(Editable message text)
Programmable warning:
Warning generated by edge
counter 2.
Check the source of the warning
(parameter
).
A88A
Value counter 1
(Editable message text)
Programmable warning:
Warning generated by value
counter 1.
Check the source of the warning
(parameter
).
A88B
Value counter 2
(Editable message text)
Programmable warning:
Warning generated by value
counter 2.
Check the source of the warning
(parameter
).
Code
(hex)
Warning
Cause
What to do
Содержание ACS880-x04
