ABB ACS880-x04, Руководство по прошивке

Страница: 287 / 604

Parameters 287
33.22 On-time 2 function Configures on-time timer 2. 0000b
0000b…0011b On-time timer 2 configuration word. 1 = 1
33.23 On-time 2 source Selects the signal to be monitored by on-time timer 2. False
False Constant 0 (timer disabled). 0
True Constant 1. 1
RO1 Bit 0 of 10.21 RO status (page 151 ). 2
Other [bit] Source selection (see Terms and abbreviations on page 114 ). -
33.24 On-time 2 warn
message Selects the optional warning message for on-time timer 2. On-time 2
exceeded
On-time 2
exceeded A887 On-time 2 . The message text can be edited on the
control panel by choosing Menu – Settings – Edit texts.
1
Clean device A88C Device clean . 6
Maintain additional
cool fan A890 Additional cooling . 7
Maintain cabinet
fan A88E Cabinet fan . 8
Maintain DC
capacitors A88D DC capacitor . 9
Maintain motor
bearing A880 Motor bearing . 10
33.30 Edge counter 1
actual Actual present value of signal edge counter 1.
The counter is incremented every time the signal selected by
parameter
33.33 Edge counter 1 source switches on or off (or
either, depending on the setting of 33.32 Edge counter 1
function ). A divisor may be applied to the count (see 33.34
Edge counter 1 divider ).
When the counter exceeds the limit set by 33.31 Edge counter
1 warn limit , bit 2 of 33.01 Counter status is set to 1. The
warning specified by 33.35 Edge counter 1 warn message is
also given if enabled by 33.32 Edge counter 1 function .
The counter can be reset from the Drive composer PC tool, or
from the control panel by keeping Reset depressed for over 3
seconds.
-
0…4294967295 Actual present value of signal edge counter 1. -
No. Name/Value Description Def / FbEq16
Bit Function
0 Counter mode
0 = Loop: When the limit is reached, the counter is reset. The counter status (bit 1 of
33.01 ) switches to 1 for one second. The warning (if enabled) stays active for at least 10
seconds.
1 = Saturate: When the limit is reached, the counter status (bit 1 of
33.01 ) switches to 1,
and remains so until 33.20 is reset. The warning (if enabled) also stays active until 33.20
is reset.
1 Warning enable
0 = Disable: No warning is given when the limit is reached
1 = Enable: A warning (see
33.24 ) is given when the limit is reached
2…15 Reserved