![background image](http://html1.mh-extra.com/html/abb/acs880-x04/acs880-x04_firmware-manual_3389539213.webp)
Parameters 213
PID
(output of the process PID
controller).
16
Control panel (ref
saved)
Control panel reference, with initial value from last-used panel
reference. See section
Using the control panel as an external
(page
18
Control panel (ref
copied)
Control panel reference, with initial value from previous
source or actual value. See section
(page
).
19
Source selection (see
). -
Selects speed reference source 2.
For the selections, and a diagram of reference source
selection, see parameter
Selects a mathematical function between the reference
sources selected by parameters
and
. See diagram at
Ref1
is used as speed
reference 1 as such (no function applied).
0
Add (ref1 + ref2)
The sum of the reference sources is used as speed reference
1.
1
Sub (ref1 - ref2)
The subtraction ([
] - [
]) of the reference sources is used as speed
reference 1.
2
Mul (ref1 × ref2)
The multiplication of the reference sources is used as speed
reference 1.
3
Min (ref1, ref2)
The smaller of the reference sources is used as speed
reference 1.
4
Max (ref1, ref2)
The greater of the reference sources is used as speed
reference 1.
5
Configures the selection between speed references 1 and 2.
See diagram at
.
0 = Speed reference 1
1 = Speed reference 2
Speed reference 1
0.
0
Speed reference 2
1.
1
Follow Ext1/Ext2
selection
Speed reference 1 is used when external control location
EXT1 is active. Speed reference 2 is used when external
control location EXT2 is active.
See also parameter
.
2
DI1
Digital input DI1 (
, bit 0).
3
DI2
Digital input DI2 (
, bit 1).
4
DI3
Digital input DI3 (
, bit 2).
5
DI4
Digital input DI4 (
, bit 3).
6
DI5
Digital input DI5 (
, bit 4).
7
DI6
Digital input DI6 (
, bit 5).
8
DIO1
Digital input/output DIO1 (
, bit 0).
11
DIO2
Digital input/output DIO2 (
, bit 1).
12
Source selection (see
). -
No.
Name/Value
Description
Def
/
FbEq16
Содержание ACS880-x04
