![background image](http://html1.mh-extra.com/html/abb/acs880-x04/acs880-x04_firmware-manual_3389539391.webp)
Parameters 391
Encoder 1
revolution extension
Displays the revolution count extension for encoder 1.
With a single-turn encoder, the counter is incremented when
encoder position (parameter
) wraps around in the
positive direction, and decremented in the negative direction.
With a multiturn encoder, the counter is incremented when the
revolutions count (parameter
) exceeds the value range
in the positive direction, and decremented in the negative
direction.
This parameter is read-only.
-
-2147483648 …
2147483647
Encoder 1 revolution count extension.
-
Displays the raw measurement data of encoder 1 position
(within one revolution) as a 24-bit unsigned integer received
from the encoder interface.
This parameter is read-only.
-
0…16777215
Raw encoder 1 position within one revolution.
-
Displays the revolutions of (multiturn) encoder 1 within its
value range (see parameter
) as a
raw measurement.
This parameter is read-only.
-
0…16777215
Raw encoder 1 revolution count.
-
Displays encoder 2 speed in rpm.
This parameter is read-only.
-
-32768.00 …
32767.00 rpm
Encoder 2 speed.
See par.
Displays the actual position of encoder 2 within one
revolution.
This parameter is read-only.
-
0.00000000 …
1.00000000 rev
Encoder 2 position within one revolution.
-
Encoder 2 multiturn
revolutions
Displays the revolutions of (multiturn) encoder 2 within its
value range (see parameter
).
This parameter is read-only.
-
0…16777215
Encoder 2 revolutions.
-
Encoder 2
revolution extension
Displays the revolution count extension for encoder 2.
With a single-turn encoder, the counter is incremented when
encoder position (parameter
) wraps around in the
positive direction, and decremented in the negative direction.
With a multiturn encoder, the counter is incremented when the
revolutions count (parameter
) exceeds the value range
in the positive direction, and decremented in the negative
direction.
This parameter is read-only.
-
-2147483648 …
2147483647
Encoder 2 revolution count extension.
-
Displays the raw measurement data of encoder 2 position
(within one revolution) as a 24-bit unsigned integer received
from the encoder interface.
This parameter is read-only.
-
0…16777215
Raw encoder 2 position within one revolution.
-
No.
Name/Value
Description
Def
/
FbEq16
Содержание ACS880-x04
