![background image](http://html1.mh-extra.com/html/abb/acs880-x04/acs880-x04_firmware-manual_3389539375.webp)
Parameters 375
Selects the type and scaling of reference 1 received from the
external controller. The resulting value is shown by
Auto
Type and scaling are chosen automatically according to which
reference chain (see settings
) the
incoming reference is connected to. If the reference is not
connected to any chain, no scaling is applied (as with setting
0
Transparent
No scaling is applied.
1
General
Generic reference with a scaling of 100 = 1 (ie. integer and
two decimals).
2
Torque
The scaling is defined by parameter
.
3
Speed
The scaling is defined by parameter
4
Frequency
The scaling is defined by parameter
. 5
Selects the type and scaling of reference 2 received from the
external controller. The resulting value is shown by
For the selections, see parameter
.
Selects the type/source and scaling of actual value ACT1
transmitted to the external controller.
Auto
Type/source and scaling follow the type of reference 1
selected by parameter
. See
the individual settings below for the sources and scalings.
0
Transparent
Reserved.
1
General
Reserved.
2
Torque
is sent as actual value 1. The scaling is
defined by parameter
3
Speed
is sent as actual value 1. The scaling
is defined by parameter
4
Frequency
is sent as actual value 1. The scaling
is defined by parameter
5
Selects the type/source and scaling of actual value ACT2
transmitted to the external controller.
Auto
Type/source and scaling follow the type of reference 2
selected by parameter
. See
the individual settings below for the sources and scalings.
0
Transparent
Reserved.
1
General
Reserved.
2
Torque
is sent as actual value 2. The scaling is
defined by parameter
3
Speed
is sent as actual value 2. The scaling
is defined by parameter
4
Frequency
is sent as actual value 2. The scaling
is defined by parameter
5
Selects the pair of data sets used by the mailbox service in the
drive/controller communication.
See section
(page
).
Dataset 32/33
Data sets 32 and 33.
0
No.
Name/Value
Description
Def
/
FbEq16
Содержание ACS880-x04
