![background image](http://html1.mh-extra.com/html/abb/acs880-x04/acs880-x04_firmware-manual_3389539242.webp)
242 Parameters
Displays the output of the proportional (P) part of the speed
controller. See the control chain diagram on page
.
This parameter is read-only.
-
-30000.0 …
30000.0%
P-part output of speed controller.
See par.
Displays the output of the integral (I) part of the speed
controller. See the control chain diagram on page
.
This parameter is read-only.
-
-30000.0 …
30000.0%
I-part output of speed controller.
See par.
Displays the output of the derivative (D) part of the speed
controller. See the control chain diagram on page
.
This parameter is read-only.
-
-30000.0 …
30000.0%
D-part output of speed controller.
See par.
Displays the output of the acceleration compensation function.
See the control chain diagram on page
This parameter is read-only.
-
-30000.0 …
30000.0%
Output of acceleration compensation function.
See par.
Displays the acceleration-compensated output of the speed
controller. See the control chain diagram on page
.
This parameter is read-only.
-
-30000.0 …
30000.0%
Acceleration-compensated output of speed controller.
See par.
26
Settings for the torque reference chain.
See the control chain diagrams on pages
.
Displays the final torque reference given to the torque
controller in percent. This reference is then acted upon by
various final limiters, like power, torque, load etc.
See the control chain diagrams on pages
.
This parameter is read-only.
-
-1600.0 … 1600.0% Torque reference for torque control.
See par.
Displays the final torque reference (in percent of motor
nominal torque) given to the DTC core, and comes after
frequency, voltage and torque limitation.
See the control chain diagram on page
This parameter is read-only.
-
-1600.0 … 1600.0% Torque reference for torque control.
See par.
Defines the minimum torque reference. Allows for local
limiting of the torque reference before it is passed on to the
torque ramp controller. For absolute torque limiting, refer to
parameter
.
-300.0%
-1000.0 … 0.0%
Minimum torque reference.
See par.
No.
Name/Value
Description
Def
/
FbEq16
Содержание ACS880-x04
