![background image](http://html1.mh-extra.com/html/abb/acs880-x04/acs880-x04_firmware-manual_3389539179.webp)
Parameters 179
(Visible when
=
)
Defines the real value that corresponds to the minimum
analog input AI2 value defined by parameter
0.000
-32768.000 …
32767.000
Real value corresponding to minimum AI2 value.
1 = 1
(Visible when
=
)
Defines the real value that corresponds to the maximum
analog input AI2 value defined by parameter
See the drawing at parameter
100.000
-32768.000 …
32767.000
Real value corresponding to maximum AI2 value.
1 = 1
(Visible when
=
Displays the value of analog input AI3 in mA or V (depending
on whether the input is set to current or voltage).
This parameter is read-only.
-
-22.000 … 22.000
mA or V
Value of analog input AI3.
1000 = 1 mA
or V
(Visible when
=
Displays the value of analog input AI3 after scaling. See
parameter
.
This parameter is read-only.
-
-32768.000 …
32767.000
Scaled value of analog input AI3.
1 = 1
(Visible when
=
Forced value that can be used instead of the true reading of
the input. See parameter
0.000 mA
-22.000 … 22.000
mA or V
Forced value of analog input AI3.
1000 = 1 mA
or V
(Visible when
=
Shows the position of the hardware current/voltage selector
on the I/O extension module.
Note:
The setting of the current/voltage selector must match
the unit selection made in parameter
.
I/O module reboot either by cycling the power or through
parameter
is required to validate any
changes in the hardware settings.
-
V
Volts.
2
No.
Name/Value
Description
Def
/
FbEq16
AI
in
(
AI
scaled
(
Содержание ACS880-x04
