![background image](http://html1.mh-extra.com/html/abb/acs880-x04/acs880-x04_firmware-manual_3389539352.webp)
352 Parameters
Activates fieldbus communication monitoring separately for
each control location (see section
The parameter is primarily intended for monitoring the
communication with FBA B when it is connected to the
application program and not selected as a control source by
drive parameters.
0000b
0000b…0111b
FBA B communication monitoring selection.
1 = 1
51
Fieldbus adapter A configuration.
Displays the type of the connected fieldbus adapter module.
0
= Module is not found or is not properly connected, or is
disabled by parameter
;
1
= FPBA;
32
= FCAN;
37
= FDNA;
101
= FCNA,
128
= FENA-11/21;
135
= FECA;
136
= FEPL;
485
= FSCA.
This parameter is read-only.
-
…
are adapter module-specific. For
more information, see the documentation of the fieldbus
adapter module. Note that not all of these parameters are
necessarily in use.
-
0…65535
Fieldbus adapter configuration parameter.
1 = 1
…
…
…
…
See parameter
-
0…65535
Fieldbus adapter configuration parameter.
1 = 1
Validates any changed fieldbus adapter module configuration
settings. After refreshing, the value reverts automatically to
Note:
This parameter cannot be changed while the drive is
running.
Done
Refreshing done.
0
Refresh
Refreshing.
1
Displays the parameter table revision of the fieldbus adapter
module mapping file (stored in the memory of the drive).
In format axyz, where ax = major table revision number; yz =
minor table revision number.
This parameter is read-only.
-
Parameter table revision of adapter module.
-
Displays the drive type code in the fieldbus adapter module
mapping file (stored in the memory of the drive).
This parameter is read-only.
-
0…65535
Drive type code stored in the mapping file.
1 = 1
No.
Name/Value
Description
Def
/
FbEq16
Bit
Name
Value
0
Ext 1
1 = Communication monitoring active when Ext 1 is being used.
1
Ext 2
1 = Communication monitoring active when Ext 2 is being used.
2
Local
1 = Communication monitoring active when local control is being
used.
3…15
Reserved
Содержание ACS880-x04
