![background image](http://html1.mh-extra.com/html/abb/acs880-x04/acs880-x04_firmware-manual_3389539177.webp)
Parameters 177
(Visible when
=
Defines the activation delay for relay output RO2. See
parameter
0.00 s
0.00 … 3000.00 s
Activation delay for RO2.
10 = 1 s
(Visible when
=
Defines the deactivation delay for relay output RO2. See
parameter
0.00 s
0.00 … 3000.00 s
Deactivation delay for RO2.
10 = 1 s
(Visible when
=
)
Displays the value of analog input AI2 in mA or V (depending
on whether the input is set to current or voltage).
This parameter is read-only.
-
-22.000 … 22.000
mA or V
Value of analog input AI2.
1000 = 1 mA
or V
(Visible when
=
)
Displays the value of analog input AI2 after scaling. See
parameter
.
This parameter is read-only.
-
-32768.000 …
32767.000
Scaled value of analog input AI2.
1 = 1
(Visible when
=
)
Forced value that can be used instead of the true reading of
the input. See parameter
0.000 mA
-22.000 … 22.000
mA or V
Forced value of analog input AI2.
1000 = 1 mA
or V
(Visible when
=
)
Shows the position of the hardware current/voltage selector
on the I/O extension module.
Note:
The setting of the current/voltage selector must match
the unit selection made in parameter
.
I/O module reboot either by cycling the power or through
parameter
is required to validate any
changes in the hardware settings.
-
V
Volts.
2
mA
Milliamperes.
10
(Visible when
=
)
Selects the unit for readings and settings related to analog
input AI2.
Note:
This setting must match the corresponding hardware
setting on the I/O extension module (see the manual of the I/O
extension module). The hardware setting is shown by
parameter
. I/O module reboot
either by cycling the power or through parameter
is required to validate any changes in the
hardware settings.
V
Volts.
2
mA
Milliamperes.
10
(Visible when
=
)
Selects a hardware filtering time for AI2.
See also parameter
No filtering
No filtering.
0
No.
Name/Value
Description
Def
/
FbEq16
Содержание ACS880-x04
