![background image](http://html1.mh-extra.com/html/abb/acs880-x04/acs880-x04_firmware-manual_3389539166.webp)
166 Parameters
Displays the value of AO2 in mA.
This parameter is read-only.
-
0.000 … 22.000 mA Value of AO2.
1000 = 1 mA
Selects a signal to be connected to analog output AO2.
Alternatively, sets the output to excitation mode to feed a
constant current to a temperature sensor.
For the selections, see parameter
Defines the filtering time constant for analog output AO2. See
parameter
0.100 s
0.000 … 30.000 s
Filter time constant.
1000 = 1 s
Defines the real minimum value of the signal (selected by
parameter
) that corresponds to the
minimum required AO2 output value (defined by parameter
Programming
as the maximum value and
as the
minimum value inverts the output.
0.0
-32768.0 …
32767.0
Real signal value corresponding to minimum AO2 output
value.
1 = 1
No.
Name/Value
Description
Def
/
FbEq16
I
AO2
(mA)
Signal
(real)
selected by
I
AO2
(mA)
Signal
(real)
selected by
Содержание ACS880-x04
