![background image](http://html1.mh-extra.com/html/abb/acs880-x04/acs880-x04_firmware-manual_3389539146.webp)
146 Parameters
Application
environment status
1
(Only visible with N8010 [application
programmability])
Shows which tasks of the application program are running.
See the
Drive (IEC 61131-3) application programming manual
(3AUA0000127808 [English]).
-
0000h…FFFFh
Application program task status.
1 = 1
Application
environment status
2
(Only visible with N8010 [application
programmability])
Shows the status of the openings in the application program.
See the
Drive (IEC 61131-3) application programming manual
(3AUA0000127808 [English]).
-
0000h…FFFFh
Application program opening status.
1 = 1
(Only visible with N8010 [application
programmability])
First five ASCII letters of the name given to the application
program in the programming tool. The full name is visible
under System info on the control panel or the Drive composer
PC tool.
_N/A_ = None.
-
(Only visible with N8010 [application
programmability])
Application program version number given to the application
program in the programming tool. Also visible under System
info on the control panel or the Drive composer PC tool.
-
First five ASCII letters of the name given to the customization
package. The full name is visible under System info on the
control panel or the Drive composer PC tool.
_N/A_ = None.
-
Customization package version number. Also visible under
System info on the control panel or the Drive composer PC
tool.
-
No.
Name/Value
Description
Def
/
FbEq16
Bit
Name
Description
0
Pre task
1 = Pre-task running.
1
Appl task1
1 = Task 1 running.
2
Appl task2
1 = Task 2 running.
3
Appl task3
1 = Task 3 running.
4…14
Reserved
15
Task monitoring
1 = Task monitoring enabled.
Bit
Name
Description
0
Opening1
Status of opening 1 in the application program.
1
Opening2
Status of opening 2 in the application program.
…
…
…
15
Opening16
Status of opening 16 in the application program.
Содержание ACS880-x04
