![background image](http://html1.mh-extra.com/html/abb/acs880-x04/acs880-x04_firmware-manual_3389539388.webp)
388 Parameters
(Parameters
…
only visible when supply unit
control activated by
define a target for the data
received in data set 11 from another converter (typically the
supply unit of the drive).
Parameters
display the data received from
the other converter in integer format, and can be used as
sources by other parameters.
For example, this parameter selects a target for word 1 of data
set 11. Parameter
INU-LSU data set 11 data 1 value
displays the received data in integer format, and can also be
used as a source by other parameters.
None
None.
0
LSU SW
Status word of the supply unit.
4
). -
Defines a target for the data received as word 2 of data set 11.
See also parameter
INU-LSU data set 11 data 2 value
.
For the selections, see parameter
Defines a target for the data received as word 3 of data set 11.
See also parameter
INU-LSU data set 11 data 3 value
.
For the selections, see parameter
Displays (in integer format) the data received from the other
converter as word 1 of data set 11.
A target for this data can be selected by parameter
INU-LSU data set 11 data 1 sel
The value can also be used
as a source by another parameter.
0
0…65535
Data received as word 1 of data set 11.
Displays (in integer format) the data received from the other
converter as word 2 of data set 11.
A target for this data can be selected by parameter
INU-LSU data set 11 data 2 sel
The value can also be used
as a source by another parameter.
0
0…65535
Data received as word 2 of data set 11.
Displays (in integer format) the data received from the other
converter as word 3 of data set 11.
A target for this data can be selected by parameter
INU-LSU data set 11 data 3 sel
The value can also be used
as a source by another parameter.
0
0…65535
Data received as word 3 of data set 11.
No.
Name/Value
Description
Def
/
FbEq16
Содержание ACS880-x04
