![background image](http://html1.mh-extra.com/html/abb/acs880-x04/acs880-x04_firmware-manual_3389539258.webp)
258 Parameters
29
Settings for the DC voltage reference chain.
See section
(page
) and the
control chain diagrams (pages
and
This group is only visible with a BCU control unit.
Displays the DC voltage controller output that is transferred to
the torque controller.
This parameter is read-only.
-
-1600.0 … 1600.0% Final DC voltage reference.
100 = 1%
Displays the DC voltage reference after the function applied
by parameter
(if any), and after
selection (
). See the diagram
.
-
0…2000 V
DC voltage reference after selection.
10 = 1 V
Displays the DC voltage reference between
minimum/maximum limitation and ramping.
-
0…2000 V
DC voltage reference before ramping.
10 = 1 V
Displays the DC voltage reference after ramping.
-
0…2000 V
DC voltage reference after ramping.
10 = 1 V
Displays the measured DC voltage after filtering.
-
0…2000 V
Measured and filtered DC voltage.
10 = 1 V
Displays the difference between the ramped voltage reference
(
) and measured, filtered DC voltage (
).
-
-2000…2000 V
Measured and filtered DC voltage.
10 = 1 V
Displays the output of the PI controller, ie. the DC voltage
reference before it is converted to a torque reference.
-
-300.00 … 300.00% Output of the PI controller.
10 = 1%
Defines a minimum limit for the DC voltage reference before it
is ramped.
0 V
0…2000 V
Minimum DC voltage reference.
1 = 1 V
Defines a maximum limit for the DC voltage reference before it
is ramped.
2000 V
0…2000 V
Maximum DC voltage reference.
1 = 1 V
No.
Name/Value
Description
Def
/
FbEq16
Содержание ACS880-x04
