![background image](http://html.mh-extra.com/html/xerox/workcentre/workcentre_user-manual_884159037.webp)
Getting Started
WorkCentre
®
XXXX
User Guide
37
Power On and Off
Powering the Device On
1. Ensure that your device is connected to a suitable power supply and that the power cord is fully
plugged in to the electrical outlet of the device.
2. Press
the
Power
button. The entire powering on process (to power on all installed options) takes
less than 3 minutes 50 seconds.
Note:
If there are any pages in the document feeder input tray when the device powers on or
exits power save mode you will be prompted to reload the documents.
Powering the Device Off
Power Off ends the current session and turns off the device.
1. Press
the
Power
button on the control panel.
2. Select
the
Power Off
button on the touch screen.
3. Select
the
Power Off
button again to confirm that the device should power off.
Note:
Confirming power off will result in the deletion of any jobs currently in the queue. If
Cancel
is selected the power off option will be cancelled, the device will be available for use and
any jobs currently in the queue will be retained.
The device will begin a controlled power down sequence. It remains on for approximately 36
seconds before switching off.
Summary of Contents for WorkCentre
