![background image](http://html.mh-extra.com/html/xerox/workcentre/workcentre_user-manual_884159424.webp)
WorkCentre
®
XXXX
424
User Guide
Note:
To print an XPS document, your device needs to have the optional XPS feature installed.
Depending on the optional finishing device and kits installed you will have the choice of different
output options such as stapling, folding and collating.
Note:
This option must be made available by your System Administrator.
The options available from your print driver depend on how your System Administrator has
configured the print driver on your computer.
Use the stapling options to staple your document. The options available are dependent on the
finishing device installed. The basic stapling options are Off, 1 Staple, 2 Staples and Multi-Staple.
1. Open the document to be printed. From most applications select the
Office
button or select
File
, then select
from the file menu.
2. Enter the number of copies you want to produce. Depending on the application you are using
you may also be able to select a page range and make other print selections.
3. Open the print driver Properties window - the method will vary depending on the application
you are printing from. From most Microsoft applications select the
Properties
or
Preferences
button to open the window.
4. Select the Xerox XPS driver from the list of print drivers available.
5. If required, click the
Printing Options
tab. This is usually the active tab when the print driver
opens.
6. Select the stapling option required from the Finishing menu.
•
1 Staple
positions a single staple the top left corner of your document.
•
2 Staples
positions 2 staples along the long edge of your document.
7. Click
the
OK
button to save your settings.
8. Select the confirmation button, the name will vary depending on the application you are
printing from. From most applications select the
OK
or
button.
9. Collect your job from the device.
10. Press the
Job Status
button on the device control panel to view the job list and check the status
of the job.
11. Print jobs are usually shown in the Active Jobs list, however if your System Administrator has
enabled the Hold All Jobs feature, your job will be listed in either the Held Print Jobs or the
Unidentified Print Jobs list. To release a held job select the job in the required list and then
select the
Release
button.
12. If your job remains held in the Active Jobs list, the device needs you to supply additional
resources, such as paper or staples before it can complete the job. To find out what resources
are needed, select the job and then select the
Details
button. Once the resources are available
the job will print.
More Information
Printing a Document using the XPS Print Driver
System Administrator Guide
www.xerox.com/support
.
Using Internet Services to find System Administrator Contact Details
Viewing the Progress and Details of a Job using the Job Status Menu
Logging into a Print Driver using Xerox Standard Accounting or Network Accounting
Summary of Contents for WorkCentre
